Operating Your Dryer - Whirlpool 3401011 Use And Care Manual

Operating Your Dryer
In This Section
Page
Page
Before starting
your dryer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Selecting
a cycle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Starting or stopping your dryer . . . . . . . . . . . . . . . . . . . . . . . . 5
Operating your dryer properly assures the best drying results. This section gives you important
information to help you to select a cycle, time, and temperature.
Before starting your dryer
Wipe the dryer drum before using to remove
dust from storing and shipping.
If your dryer has a Consumer Buy Guide,
remove it and place it in your Use and Care
Guide.
Refer to the information below, and "Laundry
Tips" on page 12 for control setting, sorting,
and loading information.
Starting or stopping your dryer
Starting your dryer
Close the door and select a cycle. See pages
7-9 for additional setting information. Your
dryer automatically stops when a cycle ends.
Stopping and restarting your
dryer
Open the dryer door or turn the Cycle Control
Knob to OFF. Close the door; make new
selections (if necessary). Push the Start
Button.
NOTE: The Cycle Control Knob should point to
an OFF area when the dryer is not in use. If
the dryer is stopped before the cycle is
finished, turn the Cycle Control Knob to an
OFF area.
6