Installation - AOpen 24CH3Y User Manual

Installation

To install the monitor on your host system, please follow the steps below:
Steps
1 Turn off your monitor and unplug your computer's power cord.
2 2-1 Connect VGA Cable (Only VGA-input model)
a Make sure both the monitor and computer are powered-OFF.
b Connect the VGA cable to the computer.
2-2 Connect HDMI Cable (Only HDMI-input model)
a Make sure both the monitor and computer are powered-OFF.
b Connect the HDMI cable to the computer.
3 Insert the power cable of adapter into the power port at the back of the Monitor,
then plug the adapter into a nearby electrical outlet.
4 Turn on the monitor first, then the computer. This sequence is very important.
5 If the monitor does not function properly, please refer to the troubleshooting section to
diagnose the problem.
In order to prevent damage to the monitor, do not lift the monitor by its base.
6