Download Print this page

Wharfedale Pro DM4.0 Specifications

Super cardioid dynamic microphone

Advertisement

Quick Links

DM4.0_Brochure RevC.indd 1
Super Cardioid
Dynamic
Microphone
DM4.0 & DM4.0S
FEATURES
+ Frequency response tailored for voice for clear vocal reproduction
+ Uniform super-cardioid pickup pattern isolates the main sound source and minimizes
background noise
+ Features high output, fast transients and clean articulation
+ Dent resistant spring steel grille
+ Low handling noise
APPLICATIONS
+ Live Stage
Clubs
Houses of Worship
Corporate
Presentations
Karaoke
+ Instruments
Electric guitar amplifiers
drums, horns, percussion
+ Home Studio
All vocal and instrument applications
The DM4.0 and DM4.0S are available either as a single mic,
or as a pack of three microphones. The single pack contains
one microphone with stand adaptor as well as a 4.5 meter
XLR-XLR cable. The pack of microphones is supplied in a hard
wearing carry case and contains three microphones with
stand adaptors and screws.
*Also available are the DM2.0 & 2.0S,
DM3.0 & 3.0S and DM5.0 & 5.05!
10/18/06 5:19:24 PM

Advertisement

loading

Summary of Contents for Wharfedale Pro DM4.0

  • Page 1 DM4.0_Brochure RevC.indd 1 Super Cardioid Dynamic Microphone DM4.0 & DM4.0S FEATURES + Frequency response tailored for voice for clear vocal reproduction + Uniform super-cardioid pickup pattern isolates the main sound source and minimizes background noise + Features high output, fast transients and clean articulation + Dent resistant spring steel grille + Low handling noise APPLICATIONS + Live Stage Clubs Houses of Worship Corporate Presentations Karaoke + Instruments Electric guitar amplifiers drums, horns, percussion + Home Studio All vocal and instrument applications The DM4.0 and DM4.0S are available either as a single mic, or as a pack of three microphones. The single pack contains one microphone with stand adaptor as well as a 4.5 meter XLR-XLR cable. The pack of microphones is supplied in a hard wearing carry case and contains three microphones with stand adaptors and screws.
  • Page 2: Specifications

    OVERVIEW The DM4.0 is a dynamic moving coil microphone designed to handle a wide variety of vocal and instrument applications for both live sound and recording. This microphone is also available with an integral on/off switch (model DM4.0S). Characteristics of the DM4.0, such as a tight super-cardioid pickup pattern with a frequency response of 45Hz – 18kHz, slight bass proximity and mid range presence result in a warm and natural sounding response for every application. The DM4.0 is engineered to handle very high source levels without distortion and provides over 36dB of off axis feedback rejection. Low impedance and balanced output allow for interference free performance. The DM4.0 is built solidly with a cast alloy body, steel mesh grille ball and internal pop screen. POLAR CHARTS The frequency response curve shown above (measuring response at +3dB) and polar pattern correspond to typical production run specifications for this microphone. SPECIFICATIONS Transducer Type: Dynamic Frequency Response: 45Hz−18KHz Polar Pattern: Super-cardioid Output Impedance: 250ohms Sensitivity: –53dB (0dB=1V/Pa) Off-axis rejection: >26dB at 125o Maximum SPL: >136dB Cable/Connector: 3 pin gold plated male XLR Polarity: Positive voltage on pin 2 relative to pin 3 of output...

This manual is also suitable for:

Dm4.0s