Lenovo ThinkPad S5 2nd Generation Hardware Maintenance Manual page 60

Table 10. System board
Ite-
Connector (location)
m
1
LCD connector (internal)
2
Connector of the
camera/microphone
combo card
3
Wireless-LAN card slot
(internal)
4
dc-in connector (internal)
5
dc-in LED card
connector (internal)
6
Thermal fan connector
(internal)
7
HDMI connector
(external)
8
Ethernet connector
(external)
9
USB 3.0 connector
(external)
10
Audio connector
(external)
11
M.2 solid-state drive
(internal)
12
Built-in battery
connector (internal)
13
Memory module slot
14
(internal)
15
Hard disk drive or solid-
state drive connector
(internal)
16
Media-card-reader card
connector (internal)
17
Thermal fan connector
(internal)
18
Coin-cell battery
connector (internal)
19
Media-card-reader card
connector (internal)
20
Power button card
connector (internal)
21
Keyboard connectors
22
(internal)
54
Hardware Maintenance Manual
Internal cable required
LCD cable
Cable of camera/
microphone combo card
No
No
dc-in LED cable
No
No
No
No
No
No
No
No
Hard disk drive cable
Media-card-reader card
FPC cable
No
No
Media-card-reader card
wire cable
Power button card cable
No
Cable connection
Connect one end to the LCD panel and the other end to
this connector.
Connect one end to the card and the other end to this
connector.
Insert the wireless-LAN card into this slot.
Connect the dc-in connector cable that comes with the
ac power connector.
Connect the dc-in LED card to this connector.
The thermal fan assembly comes with cable. Connect
the cable to this connector.
Connect a compatible digital audio device or video
monitor to this connector.
Connect an Ethernet cable to this connector.
Connect USB-compatible devices to this connector.
Connect headphones or a headset with 3.5-mm (0.14-
inch) 4-pole plug to this connector.
Insert the M.2 solid-state drive into this slot.
The built-in battery cable comes with the built-in
battery. Connect the cable to this connector.
Insert the memory module into this slot.
Connect one end to the hard disk drive and the other
end to this connector.
Connect one end to the media-card-reader card and
the other end to this connector.
The thermal fan assembly comes with cable. Connect
the cable to this connector.
The coin-cell battery comes with cable. Connect the
cable to this connector.
Connect one end to the media-card-reader card and
the other end to this connector.
Connect one end to the power button card and the
other end to this connector.
The keyboard assembly comes with two cables.
Connect the cables to the connectors.