Makita M1902 Technical Information page 9

5-2-2 Assembling
[1] Assemble by reversing the disassembly procedure.
Fig. 5-2-2-1
[2] Set the following parts in the order from the bottom:
(1) 1R034
(2) Ball bearing 6000DDW
(3) Armature
(4) Ball bearing 607ZZ
(5) 1R032
[3] Press-fit the armature shaft into Ball bearing 607ZZ and
Ball bearing 6000DDW.
1R034
[5] Hold Armature with a waste cloth, and fasten moderately V pulley 4-20L to Bracket complete by turning it counterclockwise
with a bit adapter assembly, double ended phillips bit and impact driver.
Square drive :
12.7mm (1/2")
1R032
Ball bearing
607ZZ
Armature
Ball bearing
6000DDW
Fig. 5-2-2-3
Bit adapter Double ended
assembly phillips bit
Waste cloth
V pulley 4-20L
Armature
9 / 19
Fig. 5-2-2-2
[4] Assemble Armature to Bracket complete with 1R031
and 1R258.
1R031
Impact driver
Bracket complete
Bracket
complete
Armature
1R258