Quick-Cleaning The Food Processor Bowl And Blender Jar; Service And Guarantee; Troubleshooting - Philips HR7773 User Manual

Clean the blade unit of the food processor, the blade unit of the
blender and the inserts very carefully. The cutting edges are very sharp.
Note: All parts, except the motor unit, can also be cleaned in the dishwasher.
- Make sure that the cutting edges of the blades and the inserts do not
come into contact with hard objects. This could cause them to
become blunt.

Quick-cleaning the food processor bowl and blender jar

1 Pour lukewarm water (not more than 0.5 litres) and some
washing-up liquid into the food processor bowl or blender jar.
2 Place the lid on the food processor bowl or blender jar and turn it
clockwise to fix it.
3 Select the speed setting that corresponds with the colour of the
accessory (Fig. 18).
4 Let the appliance run until the food processor bowl or blender jar
is clean or for 30 seconds.
5 Detach the blender jar or food processor bowl and rinse it with
clean water.
storage
1 You can wind the cord around the bottom of the appliance.
Environment
- Do not throw away the appliance with the normal household waste
at the end of its life, but hand it in at an official collection point for
recycling. By doing this, you help to preserve the
environment (Fig. 32).
4222.005.0179.1.indd 9

service and guarantee

If you need service or information or if you have a problem, please visit
the Philips website at www.philips.com or contact the Philips Consumer
Care Centre in your country (you find its phone number in the
worldwide guarantee leaflet). If there is no Consumer Care Centre in
your country, go to your local Philips dealer.

Troubleshooting

This chapter summarises the most common problems you could
encounter with the appliance. If you are unable to solve the problem with
the information below, contact the Consumer Care Centre in your
country.
Problem Solution
When I turn Make sure the food processor bowl and its lid or the
the speed blender jar are assembled correctly ('click'). Make
selector to a sure that the tool holder has been inserted properly
speed or to P if you are using any accessory with the food
(pulse position) processor bowl. If you use the blender jar, make sure
the appliance it is locked in one of its four locking positions. Keep
does the lid fixed to avoid spillage. If you use the food
not operate. processor, make sure that the bowl handle is directly
above the closed lock symbol. The bowl lid is
correctly assembled when the projection is locked
into the slot of the bowl handle. If all parts are
assembled correctly, the appliance starts to operate
when you select a speed with the speed selector or
press the pulse button.
I have selected Check the colour of the accessory and choose the
the wrong corresponding speed with the speed selector.
speed for the
accessory I am
using.
EnglisH
9
10-11-10 14:03