F96 Check Of Suction Command Signal - SMC Networks ZK2-ZSV-A Series Operation Manual

■[F96] Check of suction command signal
<Operation>
Press the or button in function selection mode to display [F96].
Check of the input of suction command
signal status
When suction signal is not input, "oFF" is
displayed.
When suction signal is input, "on" is
displayed.
Press the button.
Press the button.
[F96] Check of suction command signal completed.
Move on to the suction signal input check.
Return to function selection mode.
-38-
NO.ZK2-OM00501-B