Technical Specifications; California Proposition 65 - Graco 25C539 Instructions - Parts Manual

Technical Specifications

Specifications
Technical Technical Specifications
Actual tank capacities
5-gallon
10-gallon
15-gallon
Tank inlet/outlet sizes
Air inlet size
Fluid outlet size
Bottom outlet size
Wetted parts
Weight
25C536
25C537
25C538
25C539
25C540
25C541
Maximum working pressure, high
pressure regulated tank
Maximum recommended operating
pressure, agitator
Tank relief valve setting
Maximum allowable process fluid
temperature
Recommended agitator speed
range for adequate agitation
Recommended maximum agitator
speed (higher speeds may
over-agitate the material and
decrease shaft seal life)
Recommended maximum material
viscosity
Sound pressure level at 70 psig,
maximum recommended speed
Note: Note: Note: Santoprene ® is a registered trademark of the Monsanto Co.
California Proposition Proposition 65
California California Proposition
WARNING: This product can expose you to chemicals known to the State of California
WARNING: WARNING:
to cause cancer and birth defects or other reproductive harm. For more information, go to
www.P65warnings.ca.gov.
3A4797F
8.8 gallons (33 liters)
12.6 gallons (48 liters)
19.3 gallons (72 liters)
1/4–18 npt (m)
3/8–18 npsm (m)
3/4–14 npt (f)
304 and 316 stainless steel, PTFE, nylon, and bronze.
Splashed materials: LDPE, Chloroprene, Santoprene
66 lbs (30 kg)
77 lbs (35 kg)
93 lbs (42 kg)
13 lbs (5.9 kg)
14 lbs (6.4 kg)
15 lbs (6.8 kg)
100 psig (0.7 MPa, 7 bar)
70 psig (0.5 MPa, 5 bar)
100 psi (0.7 MPa, 7 bar)
158° F (70° C)
40–60 rpm
60 rpm
1000 cP
Less than 75 dBA
65
65
Technical Specifications
27