Replacing The Oven Light - Breville LOV600 Instruction Book

REPLACING THE OVEN LIGHT

WARNING
Always unplug oven and let cool before
replacing bulb.
1. Remove the wire rack from the oven before
replacing the light.
2. The light is positioned on the right-hand
side of the oven cavity. Securely position
your fingers on the outside of the glass
cover and turn the glass cover 1/4 turn
counter-clockwise. The tabs on the cover
should clear the grooves of the socket.
Gently pull the cover out.
3. Turn the used bulb counter-
clockwise to remove.
4. Replace the bulb with one of the same type.
Using gloves or a soft dry cloth, remove the
bulb from its packaging. Touching the bulb
with your bare hand can damage the bulb
and shorten its life. Place the bulb into it's
holder and screw it in by turning clockwise.
20
LOV600BLK_ANZ_IB_B20.indd 20
REPLACEMENT BULB
Please contact Breville Customer Service
Centre for further support.
Only use the light bulb approved by Breville
for use in this oven.
5. To replace the glass cover, securely position
your fingers on the outside of the glass
cover and place the tabs in the grooves of
the socket. Turn the cover clockwise ¼ turn.
NOTE
The top of the oven is very hot during and after
operation. As a result, storing items on top of
the oven is not recommended.
NOTE
Oven light bulb replacement is not covered
under warranty.
Please contact Breville Customer Service
Centre for further support.
21/2/20 2:41 pm