Additional manuals are available from your WELLS DEALER. THIS MANUAL MUST BE READ AND UNDERSTOOD BY ALL PERSONS USING OR INSTALLING THIS APPLIANCE. Contact your WELLS DEALER if you have any questions concerning installation, operation or maintenance of this equipment.
Seller’ s obligation under this warranty is limited to the repair of defects without charge by a Wells Mfg. Co. factory authorized service agency or one of its sub-service agen- cies.
PARTS & SERVICE CUSTOMER SERVICE DATA Thank You for purchasing this Wells Manufacturing Co. appliance. Proper installation, professional operation and consistent maintenance of this equipment will ensure that it gives you the very best performance and a long, economical service life.
FEATURES & OPERATING CONTROLS H eati n g E l em en t Power Co rd Adjustabl e Legs Fi g. 1 Co un tertop E l ectri c H o tp l ate - Features & Op erati n g Co n trol s n Heating Element n Element Support * n Drip Pan*...
This appliance is intended for use in commercial establishments only. This appliance is intended to prepare food for human consumption. No other use is recommended or authorized by the manufacturer or its agents. Operators of this appliance must be familiar with the appliance use, limitations and associated restrictions.
INSTALLATION NOTE: DO NOT discard the carton or other packing materials until you have inspected the appliance for hidden damage and tested it for proper operation. Refer to SHIPPING DAMAGE CLAIM PROCEDURE on the inside front cover of this manual. CAUTION: Electric Shock Hazard...
GENERAL OPERATIONAL NOTES GENERAL OPERATIONAL NOTES Carefully read the description of the hotplate operation on the Carefully read the description of the hotplate operation on the specification sheet. specification sheet. DO NOT attempt to perform any maintenance or service unless the DO NOT attempt to perform any maintenance or service unless the hotplate is disconnected from electrical power.
CLEANING INSTRUCTIONS CAUTION: Electric Shock Hazard Disconnect hotplate from electric power before cleaning. CAUTION: Burn Hazard Allow hotplate element and cabinet to cool completely before cleaning. CAUTION: Electric Shock Hazard Do not submerge hotplate in water. IMPORTANT: DO NOT spill or pour water into interior of hotplate.
TROUBLESHOOTING SUGGESTED REMEDY Check plug and cord Check / reset circuit breaker Turn temperature control to desired setting Contact Authorized Wells Service Agency for repairs Adjust for desired temperature Be sure supply voltage matches nameplate voltage Contact Authorized Wells Service Agency for repairs...
IMPORTANT: Use only factory authorized service parts and replacement filters. For factory authorized service, or to order factory authorized replacement parts, contact your Wells authorized service agency, or call: Wells Manufacturing Co. 2 Erik Circle P. O. Box 280 Verdi, NV 89439...