Chapter 2 Basic Web GUI Operations and Behavior
2.1 Login and Logout
Chapter 2 Basic Web GUI Operations and
This chapter describes the screen configuration and logging in and out on Web screens for operating the
BMC.
2.1
Login and Logout
This section describes the login and logout procedures for the Web GUI.
Configure the browser as follows before operating the Web GUI:
- Pop-ups: Allowed
- JavaScript: Enabled
- Cookies: Enabled
2.1.1
Login
1.
Open the browser.
2.
Enter either the standard address or the SSL address.
Standard: http://nodename:adminport
SSL: https://nodename:adminport
- nodename
Specify the IP address of the BMC (BMC Management LAN [default value depends on the device] or
BMC Service LAN [default value: 172.16.0.1/24]).
- adminport
Specify the port number assigned to the management port of the BMC.
Default value
Standard: 8081
SSL: 432
Log in to the Web GUI from the login screen.
Behavior
3
C120-0091-03EN