Panasonic NV-DS27EG Service Manual page 99

www.freeservicemanuals.info
No.
1 Confirmation of Tape Running
2 Linearity Adjustment
3 Sensor Sensitivity Adjustment
4 Confirmation of B.E.R. Value
5 Tension Adjustment
Item
Equipment
Specification
1) Confirm each post position in playback mode.
2) Confirm condition of tape regulation of each post in playba
and review modes. /
Equipment
Specification
1) Connect the cables and boards between camera unit and P
(Fig.
2) Connect the ENV Detector Board between Mesuring Board
Oscilloscope. /
3) Remove the Adjustment Cover.
4) Playback the Alignment Tape.
5) Adjust S1 and/or T1 posts by screw driver until waveformis
spec.
6) After Linearity adjustment, B.E.R. value should be confirme
by using Tatsujin /
Refer to Tatsujin Adjustment.
Refer to Tatsujin Adjustment.
Refer to TR Band & TR Arm U. assembly section of this manu
World of free manuals
Procedure
1. Mini DV Cassette
Refer to Fig. 1-1 and Fig. 1-2
(Fig. 1-2)
1. DV Alignment Tape (VFM3110EDS)
2. ENV Detector Board (VFK1641)
3. Mesuring Board (VFK1308E)
4. 232C(M3) I/F Cable (VFK1395)
5. EVR Connector Board (VFK1309)
6. ConnectionAdaptor (VFK1309EX)
7. 30 pin Flat Cable(X2) (VFK1317 or
VFK1511)
8. DC Output Cable (VJA0941)
9. Personal Computer
Refer to Fig. 2-5
2-1)
(Fig. 2-2)
(Fig. 2-4, Fig. 2-5)
AdjustmentKit.
Fig. 1-1
Fig. 1-2
29
23/7/2013
(Fig. 1-1)
(Fig. 2-3)