Necta Colibri Installation - Use - Maintenance
Espresso + instant
Hide thumbs
Also See for Colibri:
- Service manual (25 pages) ,
- Instructions for installation, use and maintenance manual (48 pages) ,
- Installation, use and maintenance handbook (48 pages)
Related Manuals for Necta Colibri
Summary of Contents for Necta Colibri
- Page 1 INSTALLATION, USE, MAINTENANCE Colibrì Espresso Instant English Page DOC. NO. H 155U 01 EDITION 2 00 12...
- Page 3 DICHIARAZIONE DI CONFORMITA’ DECLARATION OF CONFORMITY DÉCLARATION DE CONFORMITÉ KONFORMITÄTSERKLÄRUNG DECLARACIÓN DE CONFORMIDAD DECLARAÇÃO DE CONFORMIDADE VERKLARING VAN OVEREENSTEMMING INTYG OM ÖVERENSSTÄMMELSE OVERENSSTEMMELSESERKLÆRING YHDENMUKAISUUSTODISTUS Valbrembo, 03/05/2001 Dichiara che la macchina descritta nella targhetta di identificazione, è conforme alle disposizioni legislative delle direttive: 89/392, 89/336, 73/23 CEE e successive modifiche ed integrazioni.
-
Page 5: Table Of Contents
PAGE 26 PISTON STROKE SETTING PAGE 14 PUSH-BUTTON BOARD PAGE 27 WATER TEMPERATURE CONTROL PAGE 14 ADJUSTING THE GRADE OF GRINDING PAGE 15 HYDRAULIC SYSTEM PAGE 28 ADJUSTING THE COFFEE DOSE PAGE 15 © by NECTA VENDING SOLUTIONS SpA 0012 Colibrì... -
Page 6: Introduction
It also assists in spare parts management. Product code Serial number Model Frequency Type Operating voltage Current Absorbed power Water mains characteristics Boiler data © by NECTA VENDING SOLUTIONS SpA 0012 Colibrì... -
Page 7: Using The Vending Machine
If possible, it is advisable to use the special cabinet, which can house the liquid waste tray, the water supply kit, the payment system and, in the case of very hard water, the softener unit. © by NECTA VENDING SOLUTIONS SpA 0012 Colibrì... -
Page 8: Technical Specifications
- Air-break float jamming (only with water supply from Power supply voltage the mains) Frequency - Overflow solenoid valve (only with water supply from the mains) Installed power 1300 W - Time protection for: Pump Coffee unit ratiomotor Coffee grinder © by NECTA VENDING SOLUTIONS SpA 0102 Colibrì... -
Page 9: Power Consumption
Installation and the following testing operations, must be carried out only by qualified personnel who have the specific knowledge of the machine functioning from a point of view of both electrical safety and health regulations. © by NECTA VENDING SOLUTIONS SpA 0012 Colibrì... -
Page 10: Loading And Cleaning
Before starting any maintenance operations requiring parts of the unit to be removed, the machine must always be disconnected from the power supply. © by NECTA VENDING SOLUTIONS SpA 0012 Colibrì... -
Page 11: Loading Cups
The cover can be opened only with the door open. The stirrers must be burr free and not curved. Lift the cover and fill the coffee container, ensuring that the shutter is fully open (see Fig. 4). © by NECTA VENDING SOLUTIONS SpA 0012 Colibrì... -
Page 12: Sanitising The Foodstuff Circuits And The Mixers
(see Fig. 5); - in order to remove the wheels, block the disk fitted on the mixer shaft with a finger (see Fig. 6); Fig. 6 © by NECTA VENDING SOLUTIONS SpA 0012 Colibrì... -
Page 13: Cleaning The Water Supply Tank
The display will show the request to enter the password; 1 - Sugar dispensing spout 2 - Pin - press one after the other buttons 4231 to reset the 3 - Flexible lever counters. 4 - Return spring © by NECTA VENDING SOLUTIONS SpA 0012 Colibrì... -
Page 14: Cleaning The Cup Shift Arm
Every time coffee is refilled, or at least once a week, any - completely empty the hydraulic system. powder residue should be removed from the external parts of the coffee unit, particularly from the coffee funnel area (see Fig. 17). © by NECTA VENDING SOLUTIONS SpA 0012 Colibrì... -
Page 15: Installation
(see Fig. 10); - open the valve and switch on the machine. Fig. 9 1 - Adjustable foot © by NECTA VENDING SOLUTIONS SpA 0012 Colibrì... -
Page 16: Connecting To The Power Supply
ANCE WITH THE ABOVE MENTIONED SAFETY RULES. LENGTH OF STIRRERS The correct installation position of the stirrer stacker must be checked according to the length of the stirrers to be used (see Fig. 1) © by NECTA VENDING SOLUTIONS SpA 0012 Colibrì... -
Page 17: Initialising
At the same time, when the brew chamber returns to its vertical position, the scraper on the coffee hopper stops the used coffee dose and drops it. The lower piston now returns to the bottom dead centre. © by NECTA VENDING SOLUTIONS SpA 0012 Colibrì... -
Page 18: Checking And Adjusting The Machine Settings
- tightening will increase the temperature; To adjust them it is therefore necessary to follow the - loosening will decrease the temperature; programming procedures. - the temperature varies by approx. 1° C every 2 turns. © by NECTA VENDING SOLUTIONS SpA 0012 Colibrì... -
Page 19: Adjusting The Grade Of Grinding
(see relevant section). Important notice!!! To refit the coffee unit, pay special attention to the piston position. Reference notches on the external disk and on the unit case should match (see Fig. 17). © by NECTA VENDING SOLUTIONS SpA 0012 Colibrì... -
Page 20: Pre-Selections
Display statistics If a coffee dose is accidentally released with the unit installed, the unit will have to be rotated to unload the Print statistics excess coffee. Delete statistics Display selection counter © by NECTA VENDING SOLUTIONS SpA 0012 Colibrì... -
Page 21: Autotest
1 - single selection counter; 2 - single price counter; 3 - counter per type of coin cashed; 4 - total cash counter; 5 - failure counter. © by NECTA VENDING SOLUTIONS SpA 0102 Colibrì... -
Page 22: Programming
BOILER FAILURE The machine will lock if after 10 minutes of heating from the machine start, or from the last selection, the boiler fails to reach the operating temperature. © by NECTA VENDING SOLUTIONS SpA 0012 Colibrì... -
Page 23: Programming Water And Powder Doses
LIQUID WASTE CONTAINER FULL If the machine is equipped with a liquid waste container (housed in the cabinet) fitted with an overflow warning device, the machine locks. © by NECTA VENDING SOLUTIONS SpA 0012 Colibrì... -
Page 24: Programming The Basic Coin And The Decimal Point
“ ” and “ ” buttons. When pressing correction button “ ”, this value will be displayed blinking and can be modified as necessary. © by NECTA VENDING SOLUTIONS SpA 0012 Colibrì... -
Page 25: Machine Configuration
If the message is enabled, when pressing the confirm coins) to be applied to the pre-selection "without cup". button “ ” the first character will blink, which can then be changed. The buttons will be assigned the following functions: © by NECTA VENDING SOLUTIONS SpA 0012 Colibrì... -
Page 26: Special Sales
- Pressing button “O” will display the following function; - Pressing button “C” will display the previous function. Fig. 16 1 - Connector 2 - Programmer holder 3 - Programmer © by NECTA VENDING SOLUTIONS SpA 0012 Colibrì... -
Page 27: Transferred Data
Machine code Machine configuration Selection counter Promotional message Setting the language Whipping time Programming access password Discount Special sales Password for Free Vend Password for "Jug facilities" Number of selections for "Jug facilities" © by NECTA VENDING SOLUTIONS SpA 0012 Colibrì... -
Page 28: Maintenance
(see Fig. 17); Check that the handle pin of the ratiomotor is correctly engaged in its seat. - undo the knob securing the unit to the bracket; - remove the brewing unit. © by NECTA VENDING SOLUTIONS SpA 0012 Colibrì... -
Page 29: Regenerating The Softener Unit
- at the end of this operation ensure that outlet water is no longer salted; it is advisable to check the hardness of the water by means of appropriate chemical reagents: the outlet water hardness should be 0° F. © by NECTA VENDING SOLUTIONS SpA 0012 Colibrì... -
Page 30: Printed Board Functions And Indicator Lights
- Board power supply - Red LED - To boiler heating element - Boiler heating element triac - 230 V~ users - Relay - Expansion board - Transformer fuse - Mains fuse © by NECTA VENDING SOLUTIONS SpA 0102 Colibrì... -
Page 31: Push-Button Board
- To machine board - Signals: free vend- jug facilities - To display board - Display contrast adjusting trimmer - Programming button - Cleaning button - RS232 port - To the programmer - Display board © by NECTA VENDING SOLUTIONS SpA 0012 Colibrì... -
Page 32: Hydraulic System
HYDRAULIC SYSTEM Espresso 1 - Water inlet solenoid valve 2 - Air-break 3 - Volumetric counter Instant 4 - Vibration pump 5 - Bypass 6 - Boiler 7 - Coffee unit © by NECTA VENDING SOLUTIONS SpA 0012 Colibrì... - Page 33 N. 8 - Volumetric counter N. 9 - Coffee unit N. 10 - Coffee failure N. 11 - Coffee release N. 12 - Cup release N. 13 - Liquid waste full Statistic N. 4 0012 Colibrì © by NECTA VENDING SOLUTIONS SpA...
- Page 34 Reading counter, Counter Counter ON Counter = #### If ON, the counter is Counter displayed when the machine is switched on. Complete sel. © by NECTA VENDING SOLUTIONS SpA 0012 Colibrì...
- Page 35 Previous function 2 - Grind and release a coffee dose 3 - Dispense sugar 4 - Autotest Next function 6 - Rotate coffee unit 7 - Release cup 8 - Empty air-break Statistics 0012 Colibrì © by NECTA VENDING SOLUTIONS SpA...
- Page 36 XXXX + 1 RICE VALUE Price N. 1 XXXX Set Prices Price N. 1 XXXX XXXX - 1 Price N. 8 Set Prices/Buttons 0012 Colibrì © by NECTA VENDING SOLUTIONS SpA...
- Page 37 Basic unit/PD Basic unit XXXX ASIC COIN VALUE AND XXXX XXX - 1 DECIMAL POINT POSITION X + 1 0 to 3 Dec. point: X Dec. point X - 1 Payment system 0012 Colibrì © by NECTA VENDING SOLUTIONS SpA...
- Page 38 Power supply 12-24 V Power supply Coin line value A to F XXX + 1 Line A Validat. lines Line A XXXX XXXX XXX - 1 Line F XXXX Executive std Price holding UKey Initialising © by NECTA VENDING SOLUTIONS SpA 0012 Colibrì...
- Page 39 Italy France Spain Great Britain Country List of layouts available per Layout Layout 1 model/country. See selection dose table Layout n Tank Tank Water supply from tank / mains Working Machine code 0012 Colibrì © by NECTA VENDING SOLUTIONS SpA...
- Page 40 X - 1 After entering 4th digit confirm new value P = Programmed number of selec- tions A = Number of selections made Cancel Confirm? Reset counters of selections made Prom. message © by NECTA VENDING SOLUTIONS SpA 0012 Colibrì...
- Page 41 Display messages in available languages: Language Language Language .Italian .French .English .Spanish XXX + 1 Whipping Whipping time Whipping d/s XXX XXXX XXX - 1 To access programming Password Password Selection Config. 0012 Colibrì © by NECTA VENDING SOLUTIONS SpA...
- Page 42 Previous function / Increase data item (+1) Exit function / Cancel change Machine installation Next function / Decrease data item (- 1) Confirm function / confirm data item Change data item Reset failures © by NECTA VENDING SOLUTIONS SpA 0012 Colibrì...
- Page 43 Previous function / Increase data item (+1) Exit function / Cancel change Machine installation Next function / Decrease data item (- 1) Confirm function / confirm data item Change data item Reset failures 0012 Colibrì © by NECTA VENDING SOLUTIONS SpA...
- Page 44 WIRING DIAGRAM LEGEND CODE DESCRIPTION CODE DESCRIPTION BDV COIN MECH CONNECTOR GRINDER COFFEE UNIT MOTOR CAM MD1-.. DOSER UNITS - INSTANT CMSB CUP RELEASE MOTOR CAM CONNECTOR FOR MDB COIN MECHANISM VOLUMETRIC COUNTER DOSER UNIT - SUGAR E1-... SOLENOID VALVE - INSTANT MF1-..
- Page 45 © by NECTA VENDING SOLUTIONS SpA NOTE...
- Page 46 NECTA VENDING SOLUTIONS SpA...
- Page 47 Colibrì Espresso...
- Page 48 NECTA VENDING SOLUTIONS SpA...
- Page 49 Colibrì Instant...
- Page 50 © by NECTA VENDING SOLUTIONS SpA NOTE...
- Page 51 The Manufacturer reserves the right to modify, without prior notice, the characteristics of the equipment described in this publication; and further declines to accept any responsibility for any inaccuracies contained in this publication which can be ascribed to printing and/or transcription errors. All instructions, drawings, tables and information contained in this publication are confidential and can neither be repro- duced completely or in part, nor be transmitted to third parties without the written permit of the Manufacturer, who has the sole ownership.