Adjustments - Weider Pro 240 831.150312 User Manual

Weider user manual weight bench 831.150312
Table of Contents

Advertisement

ADJUSTMENTS

The weight bench is designed to be used with your own weight set (not included). The steps below explain how
the weight bench can be adjusted. See EXERCISE GUIDELINES on page 12 for important exercise information
and refer to the accompanying exercise guide to see the correct form for each exercise.
Make sure all parts are properly tightened each time the weight bench is used. Replace any worn parts immediate-
ly. The weight bench can be cleaned with a damp cloth and a mild, non-abrasive detergent. Do not use solvents.
ADJUSTING THE BACKREST
The Backrest (13) can be used in a decline position,
a level position, or an incline position. To use the
Backrest in the decline position, remove the
Adjustment Pin (25) and lay the Backrest on the
Crossbar (4).
To use the Backrest (13) in the level or incline posi-
tion, lift the Backrest and insert the Adjustment Pin
(25) through the Bench Frame (1) and a hole in the
Backrest Bracket (10). Engage the top hole for a
level position, or one of the other holes for an incline
position.
ATTACHING WEIGHTS TO THE LEG LEVER
To use the Leg Lever (3), slide the desired weights
(not included) onto the Weight Tube (16). Secure the
weights with a Weight Clip (54 or 55).
Weights can be added to the Curl Bar (not shown) in
the same manner. Secure the weights to the Curl Bar
with two Weight Clips (54 or 55).
Weights can be stored on the tubes on the Uprights
(not shown).
WARNING:
than 150 pounds on the Leg Lever (3) or the
Curl Bar (not shown). Use only the Weight
Clips (54 or 55) provided with the bench.
ADJUSTING THE WEIGHT RESTS
To change the height of the Weight Rests (9), remove
the Weight Rest Knobs (23). Position the Weight
Rests at the desired height in the Uprights (8, 7 [not
shown]) and secure them with the Weight Rest Knobs.
WARNING:
Weight Rests (9) at the same height. Make sure
the Weight Rest Knobs (23) are inserted into
both the Uprights (7, 8) and the Weight Rests.
Do not place more
Always set both
16
54
Weight
8
10
13
1
25
10
3
9
23
4

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pro 240 weight bench exerciserPro 240 831.150312

Table of Contents