Crosley RANCHERO CR3022A Instruction Manual page 8

There is no power
1.Make sure AC adapter is plugged
in at the wall and at the back of the
unit.
There is no sound
1.Make sure the Function Knob(7) is
not in the AUX position.
The sound is distorted.
1.Adjust the tuner and/or antenna to
improve the signal strength. Under
certain circumstances, the
reception may be improved by
relocating the unit.
2.When using the "Aux in"mode, turn
off any EQ settings on the portable
device.
3.Check the volume level of external
device if listening to auxiliary input.
It should be set as low as possible.