Controls And Functions - LENCO L-400BK User Manual

Direct drive turntable with usb recording
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 3

CONTROLS AND FUNCTIONS

1
2
3
4
5
6
1. EP ADAPTER
This adapter allows you to play standard 7" EP vinyl records with large center holes. Place the adapter on
the CENTER SPINDLE 7" records.
2. STROBE INDICATORS
The PLATTER has four rows of indicators (dots). These indicators are used to visually detail various stages
of pitch (speed). The indicators are illuminated by the Strobe Indicator Pilot Lamp. Each row may appear
to stand still at different pitch levels.
With the strobe light on, the dots should be steady (not moving) when the speed is correct. When power
frequency is 50Hz (for example in Europe), it refers to the 1st row (small dots for speed of 33rpm) and 2nd
row (large dots for speed of 45rpm) of the spinning platter, while the 3rd and 4th row are for 60Hz (for
example in USA). By adjusting the Pitch on the right side of the control panel, you can adjust the speed.
Note: The use of heavy fluorescent lighting directly above the turntable will defeat the Strobe Indicator
Pilot Lamp affect indicator accuracy.
3. CENTER SPINDLE
This spindle holds the turntable PLATTER records stable and centered.
4. STROBE INDICATOR PILOT LAMP
This is lamp specially designed to pulse a beam of light at the STROBE INDICATORS on the turntable
PLATTER. This will give the illusion that indicators are not spinning at certain speeds.
5. POWER SWITCH
This is a rotary power switch. To turn main power on turn the switch in a clockwise direction. To turn main
power off turn the switch in counter-clockwise direction.
6. START/STOP BUTTON
This over sized push button controls platter motion. When the unit is turned on the platter will not
automatically begin to spin. Pressing the button once will engage the high torque motor and spin the platter,
pressing this again will stop the platter.
7. STYLUS HEADSHELL
The included HEADSHELL is used to connect your stylus with the tone arm.
8. HEADSHELL LOCKING NUT
After attaching the headshell to the tonearm, this locking nut will securely hold the headshell to the
tonearm.
8
8
20 21
19
22
8
9
10 11
7
18
17
16
15
14
13
12

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents