Hilti TE 6-A36 Original Operating Instructions page 19

Modification of the power tool or tampering with its parts is not permissible.
Do not use the battery as a power source for other unspecified appliances.
To avoid the risk of injury, use only genuine Hilti accessories and insert tools.
Observe the information printed in the operating instructions concerning operation, care and maintenance.
Nationally applicable industrial safety regulations must be observed.
2.2 Chuck
TE‑C CLICK chuck
2.3 Switches
Speed control switch for smooth starting
Function selector switch
Forward / reverse switch
2.4 Grips
Vibration-absorbing, pivotable side handle with depth gauge
Vibration-absorbing grip
2.5 Protective features
Mechanical slip clutch
Electronic overload protection
2.6 Additional electronic features of the power tool
The power tool is equipped with electronic overload protection. The power tool switches off automatically in the
event of overloading. When the control switch is released and then pressed again, the power tool immediately
regains full power.
In addition, the temperature of the power tool's electronics is monitored to ensure extra-long life. In the event
of the electronics overheating, the drive spindle will not rotate even when the control switch is pressed fully.
The power tool can be used again as soon as the temperature is within the permissible range.
2.7 Lubrication
Permanent lubrication (grease)
2.8 Items supplied as standard
1 Power tool
1 TE‑C CLICK chuck
1 Side handle with depth gauge
1 Operating instructions
1 Hilti toolbox (optional)
1 Cleaning cloth (optional)
1 Grease (optional)
2.9 Additional items required for operating the tool
B 36/3.0 Li‑ion battery or, alternatively, B 36/2.4 Li‑ion, B 36/2.6 Li‑ion, B 36/3.3 Li‑ion or B 36/3.9 Li‑ion
battery. C 4/36‑ACS or C 4/36‑ACS TPS charger or, alternatively, C 4/36 charger.
en
19