Sylvania SDPF1095-B User Manual page 3

1
2
3
4
5
1. POWER
After connecting power adapter, please press and hold power button for approximately 5 seconds
(until screen turns on).
When it is on, press and hold power button for approximately 3 seconds to access reboot or power off
menu. Short press on power button will turn off/onscreen (but leave the photo frame in on position).
2. USB
Connect a USB flash drive or connect to a computer to transfer data.
Note: The USB port is just for data transfer. not for charging.
3. RESET
Use a needle or paper clip to reset unit.
4. Micro SD
Load external micro SD memory cards here.
5. DC
Connect DC adapter to power on the device.