Functions - Breville AirActive 3D Connect Instruction Book

o

Functions

MODE
This Breville AirActive 3D™ Connect air
circulator has 3 modes: NORMAL, NATURAL
and SMART ECO. The air circulator will start
automatically on NORMAL mode on speed 1
once it is switched on.
To choose between these modes: touch the
button until the light illuminates next to the
selected mode; NATURAL or SMART ECO.
NORMAL MODE
NORMAL mode has 3 fan speed settings;
setting 1 for low speed, setting 2 for medium
speed and setting 3 for high speed. To choose
a circulator speed setting, touch the
until the desired speed flashes on the LED
display and the speed will adjust automatically.
NORMAL mode is the default mode settings
for this air circulator. In NORMAL mode, none
of the lights next to NATURAL or SMART
ECO illuminate on the control panel.
10
LFA208_ANZ_IB_A20_FA.indd 10
NATURAL MODE
Continuous air flow can create a chilling
effect on the skin and a discomfort when
exposed for too long. NATURAL mode
generates a gentle breeze to maintain body
temperature, by simulating wind blowing
rhythm, automatically alternating wind speeds
according to pre-programed cycles. NATURAL
mode has 3 variations.
When the air circulator is on, to activate
NATURAL mode, touch the
the light illuminates next to the NATURAL
mode on the control panel and the default
NATURAL cycle program 1 (n1) displays on
button
the LED display. The fan speed will operate
automatically according to the natural cycle 1
(n1) program.
To select NATURAL cycle program 2 (n2) and
NATURAL cycle program 3 (n3), touch the
button once or twice and 'n2' and 'n3' will
display respectively.
To stop NATURAL mode and return to
NORMAL mode, touch the
no lights illuminate next to NATURAL and
SMART ECO buttons on the control panel.
Diagram showing NATURAL cycle programs:
Program 1 (n1)
3
2
1
OFF
Program 2 (n2)
3
2
1
OFF
Program 3 (n3)
3
2
1
OFF
1 = LOW SPEED, 2 = MEDIUM SPEED, 3 = HIGH SPEED
button until
button until
28/5/20 5:29 pm