EnGenius ECB-1220R Quick Installation Manual

Wireless client bridge/ap/router/bridge router

Hide thumbs Also See for ECB-1220R:

Download this manual

Wireless Client Bridge/AP/Router/Bridge Router

Pre-requisites:-

Internet connection should be setup & ready to use (ADSL or cable modem).

2. Modem must provide RJ45 port to connect with ECB-1220R.

3. CAT 5 network cable(s), RJ45 port on PC/Notebook.

4. Microsoft Windows compatible PC/Notebook with UPnP enabled network adapter.

DC IN

STEP 1

Connect ECB-1220R INTERNET port & your modem WAN with network cable.

STEP 2

Power up ECB-1220R.POWER led on front panel lights up & remains stable.

STEP 3

Connect ECB-1220R RJ45 port & PC/Notebook RJ45 port with network cable.

STEP 4

Connect ECB-1220R RJ45 port & PC/Notebook RJ45 port with network cable.

ECB-1220R Wireless AP-Router/Client Bridge-Router

ECB-1220R

Quick Installation Guide

LAN ports

WAN

RESET ANTENNA

Quick Installation Guide

Page 1 STEP 1 Connect ECB-1220R INTERNET port & your modem WAN with network cable. STEP 2 Power up ECB-1220R.POWER led on front panel lights up & remains stable. STEP 3 Connect ECB-1220R RJ45 port & PC/Notebook RJ45 port with network cable.
Page 2 [Enter] button on your keyboard. 3. Give username/password details as admin/admin. 4. Click OK to navigate into ECB-1220R configuration home page. 5. Enable Wireless AP settings & apply settings. 6. Click Management to set the mode of the ECB-1220R.