Table of Contents
Advertisement
11. SPECIFICATIONS
Power Source
Power Consumption
Amplifier Rated Output
Sensitivity
Maximum
Sound Pressure level
Frequency Response
Audio Codec
Broadcasting Mode
Internal Messages
Network I/F
Network Protocol
Control Input
Control Output
Indicator
Dust/Water Protection
Operating Temperature
Operating Humidity
Finish
Dimensions
Weight
Note: The design and specifications are subject to change without notice for improvement.
• Accessories
Rear cover ................................................. 1
Removable terminal plug (3 pins) .............. 2
• Optional products
Speaker mount bracket: SP-131, SP-201, SP-301
Pole band:
PoE+ (IEEE802.3at Class 4), PoE (IEEE802.3af Class 3)
22 W (at PoE+ powered, rated output)
13 W (at PoE powered, rated output)
5 W (IEC62368-1)
15 W (at PoE+ powered), 8 W (at PoE powered)
112 dB (1 W, 1 m) (500 Hz to 2.5 kHz, peak level)
124 dB (at PoE+ powered, 15 W, 1 m) (500 Hz to 2.5 kHz, peak level)
121 dB (at PoE powered, 8 W, 1 m) (500 Hz to 2.5 kHz, peak level)
280 Hz to 12.5 kHz
PCMU (G.711u), PCMA (G.711a), G.722
SIP Broadcasting Mode:
Multicast Broadcasting Mode: PCMU/PCMA/G.722, Max. 10 ports
VMS Broadcasting Mode:
Internal Message Broadcasting Mode
Note
Each broadcast mode can be assigned an order of priority using the Priority
Setting function.
Max. 20 messages (Max. recording capacity: 80 MB)
Supported file formats
WAV file: 8/16/44.1/48 kHz sampling frequency, 8/16 bit, monaural/stereo
MP3 file: 32/44.1/48 kHz sampling frequency, 64 to 320 kbps, CBR/VBR,
monaural/stereo
Repeat count: 1 to 10 times
Interval time: 0 to 30 sec
Trigger:
Control Input or Remote API (HTTP)
100BASE-TX, MDI/MDI-X, RJ-45
TCP/IP, UDP, HTTP, RTP, ARP, ICMP, RTSP, SIP (RFC3261)
2 channels, no-voltage make contact inputs, open voltage: 5 V DC,
short-circuit current: 2 mA or less, removable terminal block (3 pins)
1 channel, open collector output, withstand voltage: 30 V DC,
control current: 10 mA or less, removable terminal block (3 pins)
LAN LINK/ACT (green), STATUS (orange)
IP66
–30 to +55 °C (–22 to +131 °F)
90%RH or less (no condensation)
Horn flare and body:
Reflector horn:
Rear cover:
Bracket, screws and bolts: Stainless steel
222 (w) x 211 (h) x 276 (d) mm (8.74" x 8.31" x 10.87")
1.4 kg (3.09 lb)
YS-60B
PCMU/PCMA/G.722
Audio Backchannel, PCMU
Aluminum, off-white (RAL 9010 equivalent), paint
ABS resin, off-white (RAL 9010 equivalent)
PC resin, off-white (RAL 9010 equivalent), paint
15
Advertisement
Table of Contents
