Related Manuals for Superior G1SP0002
Summary of Contents for Superior G1SP0002
- Page 2 PARTS IDENTIFIER BILLIARD CABINET LOWER SIDE APRON LOWER END APRON CORNER BRACE LEG TOP PANEL 1 PIECE 2 PIECES 2 PIECES 4 PIECES 4 PIECES POOL BALL INSIDE LEG MOLDED LEG A MOLDED LEG B MOLDED LEG C 1 SET 4 PIECES 4 PIECES 4 PIECES...
- Page 3 FIG. 1 ASSEMBLY INSTRUCTIONS 1. Find a clean, level place to begin the assembly of your billiard Table. The table will be assembled upside down and then turned upright onto its legs. This is a heavy table and turning it over will require at least two strong adults, however four adults is recommended.
- Page 4 FIG. 2 FIG. 2 MOLDED LEG ASSEMBLY 4. Carefully align the seams of the front Molded Leg A (#8) and the front Molded Leg B (#9) and snap them into place from top to bottom using the locking pieces on the Molded Legs. See FIG.
- Page 5 FIG. 3 FIG. 3 INSIDE AND MOLDED LEGS ASSEMBLY 7. Place one Inside Leg Assembly (from FIG. 1) inside one set of Molded Legs (A and B ) prepared in FIG. 2. Do the same for the Molded Legs (C and D).
- Page 6 FIG. 4 FIG. 4 APRON ASSEMBLY 11. Align the Lower Side Aprons (#2) and Lower End Aprons (#3) as shown in FIG.4. Attach them together using one Corner Brace (#4), four Washers (#17) and four Bolts (#16) per corner. Repeat step for the remaining three corners. FIG.
- Page 7 FIG. 6 CABINET ASSEMBLY FIG. 6 14. Carefully, turn the Billiard Cabinet (#1) over and place it on top of the Apron/Leg assembly. FIG. 6A From underneath the table, secure them together with twelve Bolts (#14), twenty-four Washers (#17), and twelve Nuts (#18). See FIG.6A and 6B.
-
Page 8: Service Questions
FOR PARTS SERVICE QUESTIONS, PLEASE CALL ACADEMY CUSTOMER SERVICE AT 1-888-922 2336...