ALASKA SA-398 Instruction Manual

WARNING! To Reduce The Risk Of Fire Or Electric Shock, Do Not Use This Fan with Any Solid-State Speed Control Device
NOTE: The important safeguards and instructions appearing in this manual are not meant to cover all possible conditions and situations that may occur.
It must be understood that common sense, caution and care are factors which cannot be built into this product. These factors must be supplied by the
person(s) installing, caring for and operating the unit.
Step1. (Fig. 1) Align holes from Airflow Grille to the plastic posts from the fan assembly and secure with threaded grille cap.
Step2. (Fig. 2) Choose the location for the Tile Fan taking into consideration a minimum of 8" depth clearance. Remove the ceiling tile where the Tile
Fan will be installed and a second ceiling tile next to it for access to ceiling.
Step3. (Fig. 3&4) Lift and shift Tile Fan onto the framework grid. Make sure Tile Fan rests securely on framework.
1 | P a g e
TILE FAN INSTRUCTION MANUAL
READ AND SAVE THESE INSTRUCTIONS
CAUTION!
All electrical connections must be in accordance with the local codes,
ordinances, and the National electrical Code. If you are unfamiliar with methods
of electrical wiring, secure the services of a qualified electrician.
1. Be sure electricity is turned off at the main fuse box or
circuit breaker panel before wiring.
2. Be cautious! Read all instructions and safety information
before installing your new Tile Fan.
Tile Fan Installation:
Suspended Ceilings-Grid Mount Only!
Patent Pending
Model: SA-398