Contents
1 x Mini-
1 x mini-USB
Camcorder
Cable
1 x Velcro
1 x Velcro
Headband
Mount
2 x Velcro
7 x Extra
3 x Double-stick
Tape
O-rings
Tape
Safety
• Do not point the camera directly at the sun as this may
damage the camera.
• Product is waterproof only using video-only end-cap,
properly sealed with O-ring. Do not submerge more than
32ft / 10m deep.
• Do not use in temperatures colder than –4°F / –20°C or
warmer than 104°F / 40°C
• It is recommended to turn off the camera while charging.
Overview
Power/Record Button
End-cap
mini-USB Port
Microphone
microSD
Card Slot
Reset button
Back (End-cap removed)
Troubleshooting
Problem
Camera fails to start
1 x Plastic Mount
and Rubber Strap
Camera shuts-off
immediately after
1 x Wraparound
starting
Velcro Mount
1 x Audio
End-cap
Device is not
recognized by
computer
Camera
Status LED
Lens
FOR SUPPORT AND INFORMATION,
VISIT WWW.LOREXTECHNOLOGY.COM
Copyright © 2012 Lorex Technologies Inc.
As our products are subject to continuous improvement, Lorex reserves the right to modify product
design, specifications and prices, without notice and without incurring any obligation. E&OE
Front
All trademarks belong to their respective owners. No claim is made to the exclusive right to use the
trademarkslisted, other than the trademarks owned by Lorex Technology Inc.
Solution
• The camera battery is
discharged. Charge
the camera.
• The camera has
encountered an error.
Press the Reset button.
• The camera battery is
discharged. Charge
the camera.
• MicroSD card has
not been inserted. A
microSD card (not
included) is required
for recording.
• The microSD card is
full. Remove the files
saved on the microSD
card or insert a fresh
microSD card. Note
that on Mac, you must
empty the Trash to
delete video files from
the camera.
• Mini-USB cable is
broken. Replace the
cable.
• USB port is broken. Try
a different USB port.
WATERPROOF HIGH DEFINITION
MINI-CAMCORDER
Quick Start Guide
English Version 2.0
LSC005