Advertisement
Quick Links
For safety and optimum performance, be sure to read these instructions
carefully.
Warning
•
For your safety, keep the antenna away from electric power lines to avoid
electric shock.
•
Install the antenna in good weather when there is no risk of lightning strikes. A
Lightning protection kit should be installed by a professional installer following
applicable national and local electrical to prevent injury or damage caused by
lightning.
•
For FCC compliance, the outdoor antenna must not be located within 8 inches
(20cm) of any person.
Site Selection
•
The higher the antenna is installed, the better the communication will be. If you
can install the antenna higher than surrounding obstructions, the
communication range will be better.
•
The antenna must be on the roof and maintain a three meter (10 feet)
clearance in all directions to meet RF safety requirements.
Optional Outdoor Antenna
Installation Instructions
Advertisement
Related Manuals for EnGenius AK10
Summary of Contents for EnGenius AK10
- Page 1 Optional Outdoor Antenna Installation Instructions For safety and optimum performance, be sure to read these instructions carefully. Warning • For your safety, keep the antenna away from electric power lines to avoid electric shock. • Install the antenna in good weather when there is no risk of lightning strikes. A Lightning protection kit should be installed by a professional installer following applicable national and local electrical to prevent injury or damage caused by lightning.
- Page 2 Connect the other end of the coaxial cable to the base station. Note: Use only EnGenius antenna and cable. The base station antenna connector has reverse thread that only works with cables supplied by EnGenius. whip x 6 Screw Mast...
- Page 3 Important Safety Instructions When using EnGenius DuraFon 1X / 4X, always follow basic safety precautions to reduce the risk of injury, fire, and electrical shock, including the following practices: Read and understand all instructions included in the user’s manual and this antenna installation instruction.
- Page 4 11. To reduce the risk of electrical shock, do not disassemble this product. service or repair work is required, contact EnGenius Customer Service or email us at info_canada@engeniustech.com. Opening or removing cabinet parts other than specified access doors may expose you to dangerous voltages or other risks.