Sony NW-WM1A Service Manual page 46

NW-WM1A/WM1Z
5-16. Shutdown (Shutdown)
Screen display
Diagnosis APP
[ver X.XX.XX]
Shutdown
PowerOFF (diag)
PowerOFF (normal)
Reboot (diag)
Reboot (normal)
5-16-1. Power off (test mode continues)
(PowerOFF (diag))
It can be the shutdown, in while continuing the test mode status.
Note: Perform this mode, the test mode is not released.
To release the test mode, please performed with refer to "5-16-2.
Power off (test mode release)" or "5-16-4. Reboot (test mode re-
lease)".
Procedure:
1. Enter the test mode.
(Refer to "2. SETTING THE TEST MODE" on page 33)
2. Press the [+]/[–] keys to select the "Shutdown", and press the
[ ] or [ ] key to enter the minor item.
u >
3. Press the [+]/[–] keys to select the "PowerOFF (diag)".
4. Press the [ ] key, the execution screen is displayed.
u
Screen display
Shutdown
(SHT SHUT command)
ShutDown?
(continue diag)
push PLAY key
5. Press the [ ] key, then shutdown.
u
(When after the shutdown, turn the power on, it will be start up
on test mode status)
46
5-16-2. Power off (test mode release)
(PowerOFF (normal))
It can be the shutdown, releasing the test mode status.
Procedure:
1. Enter the test mode.
(Refer to "2. SETTING THE TEST MODE" on page 33)
2. Press the [+]/[–] keys to select the "Shutdown", and press the
[ ] or [ ] key to enter the minor item.
u >
3. Press the [+]/[–] keys to select the "PowerOFF (normal)".
4. Press the [ ] key, the execution screen is displayed.
u
Screen display
Shutdown
(SHT EXIT command)
ShutDown?
(exit diag)
push PLAY key
5. Press the [ ] key, then shutdown.
u
(When after the shutdown, turn the power on, it will be start up
on normal mode status)
5-16-3. Reboot (test mode continues)
(Reboot (diag))
It can be the rebooted, in while continuing the test mode status.
Note: Perform this mode, the test mode is not released.
To release the test mode, please performed with refer to "5-16-2.
Power off (test mode release)" or "5-16-4. Reboot (test mode re-
lease)".
Procedure:
1. Enter the test mode.
(Refer to "2. SETTING THE TEST MODE" on page 33)
2. Press the [+]/[–] keys to select the "Shutdown", and press the
[ ] or [ ] key to enter the minor item.
u >
3. Press the [+]/[–] keys to select the "Reboot (diag)".
4. Press the [ ] key, the execution screen is displayed.
u
Screen display
Reboot
(SHT REDG command)
Reboot?
(continue diag)
push PLAY key
5. Press the [ ] key, then start the reboot.
u
(After the reboot, to start up on test mode status)