Harbor Freight Tools One Stop Gardens Winter 61796 Owner's Manual & Safety Instructions

1500 watt wood stove style electric heater

Advertisement

Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2020 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
Email our technical support at: productsupport@harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
20h

Advertisement

Table of Contents
loading

Summary of Contents for Harbor Freight Tools One Stop Gardens Winter 61796

  • Page 1 No portion of this manual or any artwork contained herein may be reproduced in Failure to do so can result in serious injury. any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing SAVE THIS MANUAL.
  • Page 2: Specifications

    Specifications Electrical Input 120VAC / 60Hz / 12A Heat Settings 750W / 1500W Light Bulb Type 40W Type E-12 Candelabra 253158 WARNING SYMBOLS AND DEFINITIONS This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
  • Page 3: Important Safety Information

    IMPORTANT SAFETY INFORMATION When using electrical appliances, basic 13. Use this heater only as described in this manual. precautions should always be followed to Any other use not recommended by the manufacturer reduce the risk of fire, electric shock, and may cause fire, electric shock, or injury to persons.
  • Page 4: Grounded Tools: Tools With Three Prong Plugs

    Grounding TO PREVENT ELECTRIC SHOCK AND DEATH FROM INCORRECT GROUNDING WIRE CONNECTION: Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with the tool. Never remove the grounding prong from the plug.
  • Page 5: Extension Cord

    Extension Cords 1. Grounded tools require a three wire extension cord. 7. Make sure the extension cord is properly wired Double Insulated tools can use either and in good electrical condition. Always replace a two or three wire extension cord. a damaged extension cord or have it repaired by a qualified electrician before using it.
  • Page 6 Assembly Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Turn the Switches of the heater off, unplug the heater from its electrical outlet, and allow the heater to cool completely before performing any procedure in this section.
  • Page 7 Operating Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Turn the Switches of the heater off, unplug the heater from its electrical outlet, and allow the heater to cool completely before performing any procedure in this section.
  • Page 8: Inspection And Maintenance

    Inspection and Maintenance Procedures not specifically explained in this manual must be performed only by a qualified technician. TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Turn the Switches of the heater off, unplug the heater from its electrical outlet, and allow the heater to cool completely before performing any procedures in this section.
  • Page 9: Changing The Light Bulb

    Changing the Light Bulb 1. Unplug Power Cord from outlet. 4. Replace the Bulb with a new bulb described under Specifications section on page 2. 2. Let Bulb cool for 10 minutes. WARNING! TO PREVENT SERIOUS INJURY: 3. Open the Lamp Replacement Door on the rear of Do not use a different type of light bulb or one the Heater by removing the Screws.
  • Page 10: Please Read The Following Carefully

    Parts List and Assembly Diagram PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.
  • Page 11: Assembly Diagram

    Assembly Diagram 39 39 Item 61796 For technical questions, please call 1-888-866-5797. Page 11...
  • Page 12: Limited 90-Day Warranty

    Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.

Table of Contents