Download Print this page

Advertisement

Quick Links

OWNER'S

Advertisement

loading

Summary of Contents for Kellys CROSS

  • Page 1 OWNER'S...
  • Page 2: Stem And Handlebars

    Dear customer, Torque tightening values: thank you for buying KELLYS bicycle. We strongly encourage you to read the owner’s manual Screw M8 for seat tube lock 20 - 25 Nm* first, to enjoy your bicycle and for safety reasons too. By doing so, you will have a better...
  • Page 3 CROSS owner‘smanual...
  • Page 4 CROSS owner‘smanual BICYCLE MAINTENANCE A-HEAD HEAD PARTS To keep your bike in a good condition, we want to remind you to do a proper maintanance. Tighten the screw (Allen screw) on the head parts lock (1) to take up the clearence of A-head Regulary check if all screws of your bike are properly tightened.
  • Page 5 CROSS owner‘smanual DERAILLEUR SYSTEM, GEARS SHIFTING IMPORTANT WARNING Check the correct set up of rear derailleur limits. If upper limit is released, the guide pulley Derailleur system consists of shifting levers (or shifting grips), shifting cables, front and rear derailleurs, could collide with spokes, which can cause not only damage of wheel spokes, but also freewheel (cassette sprockets) and chain.
  • Page 6 CROSS owner‘smanual CHAIN BRAKE CABLES Chain transmits power from pedals to rear bicycle wheel. It is one of the most stressed parts of bicycle Brake system of bicycle will be effective only when brake cables are correctly stretched. Brake therefore its maintainance requires higher attention. Rear derailleur provides correct chain tension.
  • Page 7 CROSS owner‘smanual Brake lever position (closer to handlebar or away from handle bar) could be adjusted by turning BRAKE FLUID CHANGE of regulation screw or Allen screw. Air in disc brake system could cause reduced braking efficiency or disc brakes failure. It is necessary bleed air from disc brake system or eventually replenish it by brake fluid.
  • Page 8 CROSS owner‘smanual must be 2 mm. When brake pads are slightly worn out and the distance from rim is more than it must push closer both fork ends. Move quick release lever only to the sides to reach its position 2 mm you can regulate this distance by red adjusting screw on brake lever.
  • Page 9: Fork Maintenance

    CROSS owner‘smanual 2. AIR SUSPENSION FORK FORK MAINTENANCE Air suspension fork compression is setup by pumping up air into fork air chamber. Valve for CLEANING / LUBRICATION - regular maintenance is crucial for proper fork operation, mainly pumping up air is in upper part of left fork leg. Unbolt valve cover and pump up till the maintenance of friction areas between outer and inner fork legs.
  • Page 10: Warranty Conditions

    CROSS owner‘smanual IMPORTANT WARNING WARRANTY When the bicycle is ridden on public roads and it is not equipped with lights and reflectors, you have to equip it by yourself according the law in your country. Retailer provides warranty for this bike 24 months from the date of purchase.
  • Page 11 The contact person • The bicycle will be registered in the system of the company KELLYS BICYCLES s.r.o. on the for the prolonged warranty claim is the bicycle dealer - the dealer is entitled to decide, web page www.kellysbike.com up to 60 days of the purchase and the registered data will...