Table of Contents
Advertisement
Handset and Base Operation
How to adjust the Handset Volume
NOTE: The Handset must be IN USE to adjust the volume
There are 2 ways to adjust Handset volume
Press the VOLUME key, located on the lower right edge of the Handset.
Repeated pressing of the VOLUME key will cycle through the 5 volume levels.
A rapid succession of beeps indicates you have reached the maximum or
minimum volume setting.
( also applies to the Handset Speakerphone)
Press the VOLUME
•
directly below the lower left corner of
the display.
Use the keys directly below the
•
symbols on the display or the VOLUME
key to raise or lower the Handset
volume.
Notice the change in the
display graph as you adjust the volume.
An increase in volume will be represented
by an increase in shaded area on the
graph. A decrease in volume will result
in a reduction of the shaded area.
Press the OK key (top, center) to confirm
•
your adjustment.
-OR-
Base Speakerphone or Headset
Volume
During an active call simply press the
•
Volume UP or DOWN keys to adjust the
Speakerphone or Headset volume
Intercom Function
Press INTERCOM/TRANSFER on
any Handset registered to your 2-Line
GIGAPHONE system, or the Base
Unit.
The screen will display your options,
for example:
BASE
HANDSET 1
HANDSET 2
HANDSET 3
GLOBAL PAGE
31
key, located
/
/
.
Advertisement
Table of Contents
