Mouse; Connecting The Mouse; Using The Mouse; Cleaning The Mouse - VTech XL Series User Manual

MOUSE

Mouse door
Once the mouse is installed, you may move the cursor around the screen freely. The
mouse has a roller ball in it; therefore, it should be used on a clean, flat surface. The
mouse is compatible with VTech

CONNECTING THE MOUSE

• Make sure the unit is off.
• Locate the mouse port on the back of the unit and plug the mouse into it.

USING THE MOUSE

1. Move the mouse in the direction you want the cursor to move.
2. Click the left mouse button to make a selection.
3. Click the right mouse button to open or close the action menu.

CLEANING THE MOUSE

1. Use a screwdriver to open the cover on the bottom of the
mouse (twist in the direction of the arrows).
2. Take the ball out of the mouse and use a dry cloth to clean the
contents of the mouse and the ball.
3. Place the ball back in the mouse, place the cover back on the
mouse, and use the screwdriver to twist the cover closed.
Left mouse button
® products only.
Right mouse button
6