5. Pull the bottom of the Escutcheon forward. (arrow1)
6. Lift up the Escutcheon to remove.(arrow2)
7.18. Removal of the V1-Board and
V2-Board
1. Operate procedure 1 to 4 of the Escutcheon remove.
2. Remove the 2 screws(N) and then remove the Angle.
3. Remove the screw(O).
4. Remove the 5key Button.
5. disconnect the coupler(V15) and then remove the V2-
Board.
6. Disconnect the coupler(V2) and then remove the V1-Board.
TH-50PHD8BK / TH-50PHD8BS / TH-50PHD8EK / TH-50PHD8ES
7.19. Removal of the Plasma Panel
1. Remove the each 4 screws and then remove the Stand
Brackets(L, R).
2. Disconnect the couplers(PB31, PB33, PB35).
3. Remove the each 3 screws and then remove the Fan
Blocks(A, B, C).
4. Remove the Slot Block.
(Reference to remove of the Slot Block).
5. Disconnect the couplers(D20, D25, PB30).
6. Disconnect the flexible cables(D31, D32, D33, D34).
7. Remove the 7 screws and then remove the PB-Board Block
and D-Board.
17