More Settings - Patrol Hawk 2AKOIPHGW User Manual

Example: Add and delete door/window sensor
1.Click to enter into the interface
2. Click the scan detection.
of adding door/window sensor.
Enter a personalise name
for easily recognition.
4. Click ok, App will automatically
5.
recognize the door/window sensor.
4.4.4 Set phone number for SMS message and phone call. (Note: this function are special for
GSM/WCDMA edition. While WiFi network is not working, it will automatically switch to
1. Click into SMS and phone 2. Click to set numbers, can setup
call numbers setting interface. 3 SMS and 3 phone call numbers.
12
3. Scan QR code on the back of the
sensors.
Click here to delete all detectors.
Click here to delete sensors one by one.
6. All the accessories are added by
scanning QR code, simple and fast.
Adding successfully.
3. After setting phone numbers,
click "ok" to finish settings.
4.4.5 Modify admin password. (Note: please refer to step 4.4, according to App prompts.)
Modify installation address. (Note: please refer to step 4.4,according to App prompts
4.4.6
4.4.7

More settings.

Items
WiFi network breakdown alert
If WiFi network breakdown, host will push
GSM/CDMA
If GSM/CDMA network breakdown, App will push alert message.
network breakdown alert
When arming, App will push
Door/ window not closed alert
properly.
If accessories in low battery, APP will push alert message.
Accessories low battery alert
Power breakdown alarm If power breakdown or out of power, App will push alert message.
When arm or disarm the panel, whether sending SMS alert.
Arm/disarm SMS alert
Siren prompt when arm/disarm
When arm or disarm by remote controllers, whether need siren prompt.
by remote controllers
The volume of internal siren The Siren volume can be adjusted,High/Medium/Low for optional.
Delay arming time (s)
The arming delay time can be chosen from 0~99s, default is 30s.
Delay alarm time (s)
Delay alarm time could be chosen from 0~99 seconds, default is 0s.
Delay disarm time (s) Delay disarm time could be chosen from 0~99 seconds, default is 0s.
Siren alert time (s)
Siren alert time could be chosen from silent or 0~254s/keep alerting. Default is 90s.
Timing arm Three group of timing arm can be setup.
Timing disarm
Three group of timing disarm can be setup.
Timing stay arm
Three group of timing stay arm (home stay) can be setup.
NC/NO alarm for wired zones The alarm mode for wired zones: NC or NO, default is NC.
GSM/CDMA network alarm
GSM/CDMA Alarm function could be chosen from Closed/Open/Auto Change.
Temperature alarm can be set from Closed or 0 ~120℃,default alarm is 85℃.
Temperature alarm (℃)
Someone at home reminder
Could set somebody at home reminder, the default is closed for this function.
)
Functions
alert message.
alert message if door/window isn't closed
℃
13