How To Insert An Sd Card/ Microsd Card - Kenwood DNX8160DABS Quick Start Manual

Basics
How to insert an SD Card/ microSD
Card
DNX8160DABS/ DNX716WDABS
1
Press <G> button.
2
Touch [OPEN] to the panel fully opens.
3
Hold the SD card with the label facing up, and
insert it into the slot until it clicks.
The unit reads the card and playback starts.
4
Press <G> button.
Ñ Eject an SD Card
1
Press <G> button.
2
Touch [OPEN] to the panel fully opens.
3
Push the SD card until it clicks and then remove
your finger from the card. The card pops up so
that you can pull it out with your fingers.
4
Press <G> button.
8
DNX5160DABS/ DNX5160BTS/ DNX3160BT
1
Hold the microSD card with the label side
facing right and the notched section down, and
insert it into the slot until it clicks.
NOTE
• A dummy microSD card is inserted as the slot cover.
Remove it before using and keep it in an appropriate place.
Ñ Eject a microSD Card
1
Push the microSD card until it clicks and then
remove your nger from the card. The card
pops up so that you can pull it out with your
ngers.
DNX516DABS
1
Open the microSD card slot cover.
2
Hold the microSD card with the label side
facing right and the notched section down, and
insert it into the slot until it clicks.
NOTE
• A dummy microSD card is inserted as the slot cover.
Remove it before using and keep it in an appropriate place.
Ñ Eject a microSD Card
1
Open the microSD card slot cover.
2
Push the microSD card until it clicks and then
remove your finger from the card. The card
pops up so that you can pull it out with your
fingers.