ECS 865GV-M3 Series User Manual page 39

Chapter 3: BIOS Setup Utility
ACPI Aware O/S
This item supports ACPI (Advanced Configuration and Power
management Interface). Use this item to enable or disable the
ACPI feature.
Power Management
Use this item to enable or disable a power management
scheme. If you enable power management, you can use the
items below to set the power management operation. Both
APM and ACPI are supported.
Suspend Mode
This item selects the status S1(Stop Clock) or S3(Suspend to
RAM) when the system enters the power-saving Suspend
mode.
Suspend Time Out
This sets the timeout for Suspend mode in minutes. If the time
selected passes without any system activity, the computer will
enter power-saving Suspend mode.
Resume On RTC Alarm / Date / Hour / Minute / Second
The system can be turned off with a software command. If you
enable this item, the system can automatically resume at a fixed
time based on the system's RTC (realtime clock). Use the items
below this one to set the date and time of the wake-up alarm. You
must use an ATX power supply in order to use this feature.
LAN/Ring Power On
The system can be turned off with a software command. If you
enable this item, the system can automatically resume if there is
an incoming call on the Modem/Ring, or traffic on the network
adapter. You must use an ATX power supply in order to use this
feature.
33