Table of Contents
Advertisement
82-N8863-1EN.book Page 46 Monday, April 24, 2006 12:19 PM
Quality
–
sets the picture compression. The
higher the compression, the better the
detail of the picture (higher pixel rate).
Options are Low, Medium, or High
(default). When set to High, the picture
file size is larger, using more memory.
LED
–
flashes a light to indicate a picture
has been taken. Options are On (default)
and Off.
Viewfinder Display
–
options are Fullscreen
and Actual.
Restoring camera menu settings
revert
The following settings
to the default setting
each time you enter and exit the camera
application:
– Low Light Mode, Self Timer,
MultiShot, Viewfinder.
remain
The following settings
you selected each time you enter and exit the
camera application:
– Flash, Resolution, Shutter Sound, White
Balance, Quality, and LED.
46
Menu options for camera mode
1.
Press
activate camera mode
2.
Select
3.
Press
options on the vertical menu bar:
–
–
–
–
–
at the setting
Note:
160 x 120 while taking pictures with frames.
The resolution returns to the original setting
once Frames is disabled.
→
Menu
Camera
or press
.
Options
.
up or down to scroll through the
Settings
displays available camera settings
you may set up prior to taking a picture.
Brightness
allows you to adjust the
brightness of the image in the home
screen LCD.
Camera Pictures
displays all pictures
taken and stored.
Last Picture
displays the most recently
taken picture.
Frames
allows you to add a frame or a
stamp to your picture. A frame or stamp
cannot be removed once it has been used
in a picture.
The picture resolution changes to
Using the Camera
to
Advertisement
Table of Contents
