Summary of Contents for JBL SYNTHESIS ARRAY SAM1HF
Page 1
® ™ YNTHESIS RRAY ODULE SAM1HF, SAM2LF Declaration of Conformity ODULAR RRAY We, Harman Consumer Group International 2, route de Tours 72500 Château du Loir France OUDSPEAKER Harman Consumer Group, Inc. declare in own responsibility that the products described in this owner’s manual are in compliance with technical 250 Crossways Park Drive standards: Woodbury, NY 11797...
™ Module home theater speaker. This product represents the NTRODUCTION synthesis of everything that JBL has learned about the emotional power of audio and video in sixty years of preemi- ................................4 NCLUDED nence in the field. It sets new benchmarks in the use of “high technology” and provides you with the experience of .............................4...
NCLUDED PEAKER LACEMENT SAM1HF It is extremely important to place the tweeter/mid-bass arrays for each of the center, left and right speakers (2) mounting brackets: metal brackets for mounting to the SAM2LF module at the same height. The horn array containing the tweeter in the center channel speaker should be no more than two (4) knobs: used to securely hold the mounting brackets to the cabinet feet higher or lower than those in the left and right speakers.
SAM1HF SAM2LF C PEAKER LACEMENT ONFIGURATION AND SSEMBLY The different configurations of speaker arrays are accomplished by combining one (1) SAM1HF module with at least 6.1-C HANNEL YSTEMS one (1) and up to four (4) SAM2LF modules. The configuration of your system depends greatly on room size and at A 6.1-channel system can be thought of as a 5.1-channel system with the what SPL the system will be used.
SAM1HF SAM2LF C SAM1HF SAM2LF C ONFIGURATION AND SSEMBLY ONFIGURATION AND SSEMBLY Detailed Configurations and System Connection Configuration 3: One SAM1HF and two SAM2LF horizontal NOTE: Shown without the trim panel installed on the SAM1HF. Configuration 1: One SAM1HF and one SAM2LF vertical Configuration 2: One SAM1HF and one SAM2LF horizontal Configuration 4: One SAM1HF and two SAM2LF vertical NOTE: Shown without the trim panel installed on the SAM1HF.
Input/Output Assignments wire. We recommend #14 AWG wire as a minimum size. Your JBL dealer can recommend suitable cables. Both the S S u u r r r r o o u u n n d d P P r r o o c c e e s s s s o o r r t t o o S S D D E E C C - - 4 4 0 0 0 0 0 0 P P I I n n p p u u t t s s S S D D E E C C - - 4 4 0 0 0 0 0 0 P P O O u u t t p p u u t t s s t t o o A A m m p p l l i i f f i i e e r r s s SAM1HF and SAM2LF utilize push-style friction binding posts that can accommodate up to #10 AWG stranded wire.
SPKR-1 SPKR-2 receiver or amplifier. If the problem has MANUAL AUTO followed the speaker, then contact your authorized JBL Synthesis custom installer 120V 50/60Hz 1800W or dealer for further assistance. If that WARNING: HAZARDOUS ENERGY, MAKE PROPER SPEAKER CONNECTIONS; SEE OWNERS MANUAL BEFORE USING.
All features and specifications are subject to change without notice. JBL, Harman International, JBL Synthesis, Synthesis and SonoGlass are trademarks of Harman International Industries, Incorporated, registered in the United States and/or other countries. Array, Symmetrical Field Geometry and Vented Gap Cooling are trademarks of Harman International Industries, Incorporated.