Advertisement
23801 E. La Palma Ave., Yorba Linda, CA 92887 Ph. 714.692.8180 Fax. 714.692.5016
Instruction Manual >
11. Always check to make sure both detachable latch pins
are fully engaged on the bottom of the mounting kit
bushing.
12. Remove the saddle bags per the instructions in the
Owner's Manual, and make any adjustments to the
mounting kit bushings until the detachable rack goes
on and off easily and securely.
13. Once all the adjustments have been made, verify all
hardware has been tightened and reinstall the saddle
bags.
14. Before each ride, check to make sure the detachable
latch pins are fully engaged underneath the mounting
bushings.
15. Check the tightness of all the screws after the first ride
and after the first 500 miles.
DETACHABLE
LATCH KNOB
MAKE SURE
LATCH PIN IS
FULLY ENGAGED
UNDER BUSHING
*** DO NOT *** EXCEED THE MAXIMUM WEIGHT CAPACITY OF THE TOUR PACK MOUNT,
MAX. WEIGHT CAPACITY INCLUDES TOUR PACK AND CONTENTS = 25 POUNDS.
DOCUMENT NO. 0018
REV. A
01/20
REAR
MOUNTING
BUSHING
FIGURE 2, TOUR PACK MOUNT INSTALLED
602-2704 / 602-2704B
ARROWS LEADING TO TOUR PACK STUDS
(OMITTED FOR VISIBILITY)
FIGURE 1, HARDWARE INSTALLATION
ITEM
DESCRIPTION
1
TOUR PACK MOUNT
2
1/4" I.D. WASHER
3
1/4-20 FLANGED NYLOCK NUT
TABLE 1, HARDWARE REFERENCE
2
www.cobrausa-vtwin.com
Page 2 of 2
QUANTITY
1
4
4
SOLO TOUR
PACK MOUNT
(TOUR PACK
REMOVED FOR
VISIBILITY)
FRONT
MOUNTING
BUSHING
Advertisement
