NETGEAR Zing Quick Start Manual

Hide thumbs Also See for Zing:

Download this manual

Getting Up and Running With Your

Your NetGear® Zing Mobile Hotspot™ has been activated and tested, by SFL Broadband staff, prior to being shipped. By

following the instructions below, you should be able to easily prepare, and connect to, the hotspot to begin accessing

the internet for educational purposes. Up to 8-10 wireless computing devices (depending on usage) can be connected

to the NetGear® Zing mobile hotspot at one time. The user of each wireless computing device that will be connecting to

the hotspot will need to be provided with the device name (below) and password (below). (Note, this can be a one-time

set-up process; the computing device will recognize the hotspot in the future and automatically connect to it.)

Insert the charged battery, or plug the hotspot into an electrical outlet. (The battery compartment is on the

back of your device.)

NetGear® Zing Mobile Hotspot™

NetGear® Zing Instructions 9-2015

pg. 1

Page 1 Up to 8-10 wireless computing devices (depending on usage) can be connected to the NetGear® Zing mobile hotspot at one time. The user of each wireless computing device that will be connecting to the hotspot will need to be provided with the device name (below) and password (below). (Note, this can be a one-time set-up process;...
Page 2 Customer Support. Your PTN can be found on the back of the device.) For additional information on your NetGear® Zing Hotspot™, please reference the hotspot’s User Guide posted on our website, at http://www.sflbroadband.org. (Please note, these user guides were created for Sprint’s retail customers and not for SFL Broadband’s “spectrum education Participants.”)