Verizon P265V1 User Manual

Verizon FiOS TV
Thank you for subscribing to
FiOS TV Service. This User
P265v1 Remote
Manual will show you how to
Control Manual
program and operate your
new FiOS TV Remote Control
(Model P265v1).
Quick Setup Guide-Verizon
FiOS remote
The following steps will guide
you to quickly set -up your
Verizon FiOS TV remote for
your TV.
1. Turn on your TV and the
FiOS STB. Make sure you
can see live television.
2. Locate the 3-digit code for
your TV brand in the list
below and circle the correct
code.
If your TV brand is not listed,
codes for additional TV
brands are listed at the back
of this manual.
3. Once you locate the brand
code, press and hold the
<OK> and keys
together. The RED LED on
the remote control will blink
twice and then stay on.
5-sec.
Model: RC2655001/01B
For additional information
about your FiOS TV service
and your remote, go to
4. Enter the 3-digit TV code
www.verizon.com/fiostvhelp
for your TV brand using the
number pad. The RED
For video instructions, press
LED will blink twice and
the <Menu> key on your
then stay on.
remote then select Help on
the Main Menu
5. Press and release the FiOS TV Remote Control
<CH +> button repeatedly Codes for Major TV Brands
until the TV turns off. You TV Brand Code
can also "back up" by AOC 026
pressing the <CH -> button. Audiovox 035
Coby 070
Envision 114
Funai 128
Haier 146
Hitachi 164
Insignia 180
JVC 193
*Please note – some TVs may
respond slower than others. LG 210
Please allow 1 second Magnavox 222
between button presses. Mitsubishi 243
Panasonic 279
6. Test that remote control is Philips 285
programmed for your TV Pioneer 290
a. Turn the TV on using the Polaroid 294
key. Proscan 302
b. Press <VOL +> and RCA 321
<VOL -> to make sure that Samsung 331
the volume keys work. Sansui 332
c. Press and keys. Sanyo 333
d. If any of these keys do not Sceptre 335
work as expected, press Sharp 342
and hold that key. Release Sony 352
it as soon as it works. Sylvania 371
Toshiba 397
Viewsonic 418
Vizio 424
Westinghouse 433
Zenith 440
7. If all these keys work, press
<OK> to save this TV brand
code programming. The
RED LED will blink 3 times
and then turn off
Your Remote Control is now
programmed for your TV!
Acronyms
1. RC = Remote Control
2. STB = FiOS TV Set Top
Box
3. VOL = Volume
4. CH+ = Channel Up
5. CH- = Channel Down
8) Troubleshooting will blink each time a new
a. If the button does not code is sent.
work correctly, make sure 6. When the TV turns off, stop
the TV is on and go back to pressing the play button right
Step 1 of the Quick Start away.
Guide. You can also try the • Please note – some TVs
Code Search Method may respond slower than
below. others.
b. If the <VOL>, <Mute>, or 7. You can press the <CH +>
<A/V> buttons do not work or <CH -> buttons to go
correctly, please refer to the forward or back one TV code
Key Fix Feature.
at a time.
c. If you think you made a 8. Test that the remote control
mistake with programming is programmed for your TV.
your remote, you can always a. Turn the TV on using the
press the <Exit> button and key.
start over. The RED LED b. Press <VOL +> and <VOL ->
will turn off if the RC is not to make sure that the volume
in programming mode. keys work.
d. If you don't press any c. Press and .
buttons for 60 seconds, the d. If any of these keys do not
remote control will work as expected, press and
automatically exit hold that key. Release it as
programming mode. soon as it works.
e. Note, if you press the <CH> 9. If these keys all work, press
button many times. and the <OK> to save this TV brand
lights on the remote control code programming. The RED
all flash rapidly, the LED will blink 3 times and
programming attempt was
then turn off.
not successful.
f. If the Brand Search method Your Remote Control is now
does not work, please try the programmed for your TV!
Code Search Method below,
which scans the complete 10.Troubleshooting
database for all TV codes. a. If the button does not
g. If you are still having work correctly, make sure
problems programming the the TV is on and go back
remote, please refer to our to Step 1 of the Code
website at Search Method.
www.verizon.com/fiostvhelp b. If the <VOL>, <Mute>, or
<A/V>, buttons do not work
correctly, please refer to the
Code Search Method to Key Fix Feature.
Program the RC c. If you think you made a
(This method could take up to mistake with programming
8 minutes)
your remote, you can
always press the <Exit>
1. Turn on your TV and the button and start over. The
FiOS STB. RED LED will turn off if the
2. Make sure you can see live RC is not in programming
television. mode.
3. Press and hold the <OK> d. Please Note, the Code
and buttons together, Search Method could take
then release both. up to 8 minutes, as it must
• The RED LED will blink twice go through over 500 codes.
and then stay on. The most common codes
4. Press and hold down the are tried first, but you may
button. need to press and
hold for a while to
5. The Remote Control will try
a new TV code every
locate the correct code.
second, and the RED LED
e. Once you have tried all the 4. The RED LED light will
TV codes in the remote blink twice, and remain on.
control, the RED LED and 5. Press .
the backlit buttons will flash 6. The RED LED will blink 3
4 times rapidly, the RED times and then turn off.
LED will turn off and the 7. If you want to change it back
remote will exit the again so that volume buttons
programming mode. control the TV follow the
f. If you are still having same steps as above but
problems programming the press in Step 5.
remote, please refer to our
website at Key Fix
www.verizon.com/fiostvhelp If your remote control is
programmed for your TV, but
OPTIONAL FEATURES the <VOL>, <Mute>, or the
<STB Power> Button Turns <A/V> keys do not work
on TV and STB correctly, then you can try
Your remote has separate using the Key Fix feature to fix
power buttons for the TV and the buttons.
STB. You can program the
key to turn on/off both 1. Press and hold the <OK>
your TV and STB at the same and buttons
time. simultaneously.
• The Red LED will blink twice
1. Turn both your TV and STB and then stay on.
on. 2. Press and hold the key that
2. Press and hold the <OK> does not work correctly.The
and buttons together, remote control will try a new
then release both. code every second.
• The RED LED will blink 3. Once the TV responds
twice and then stay on. correctly, release the button.
3. Press 9 – 7 – 7. 4. Press <OK> to save the
• The Red LED will blink current settings and finish
twice and remain on. programming your remote
4. Press . control.
• The RED LED will blink 3
times and then turn off. Reset the Remote Control
5. Test that the key Original Settings
now turns on the TV and
STB at the same time. 1. Press and hold the <OK>
6. If you want to reset the and buttons together,
remote so that the key and release.
controls Only the STB, 2. The RED LED will blink
follow the same steps as twice and then stay on.
above but press <OK> in 3. Press 9 - 0 – 0.
Step 4. 4. The RED LED will blink 3
times and then turn off to
Control TV Volume indicate original settings are
Through STB restored.
If the volume control keys 5. CAUTION, all previous
don't work with your TV, you programming in the remote
can program the remote so control will be lost if you
that the STB will control the follow this procedure.
volume.
General Instructions
1. Press and hold the <OK>
and buttons together, 1. Make sure the remote
then release both. control has a clear,
2. The RED LED will blink unobstructed view of the
twice and then stay on. STB and TV.
3. Press 9 - 5 – 5.
2. Your FiOS TV remote 2. "Widgets" displays local
control will only operate your weather, traffic, and other
FiOS TV STB and your TV. information.
3. The remote will not operate 3. displays your list of
other devices like DVD recorded programs if you
Player or Audio Receiver. have DVR service.
4. The <TV Power>,<VOL +>, 4. "Favorites" displays your
<VOL ->, <Mute> and list of favorite channels.
<A/V> buttons will always 5. is a rocker button.
control your TV. Press lower half of
5. All other keys on the remote the button to
control will always control
your FiOS TV STB. pause the program. Press
upper half of the button
Getting Started <►> to continue to play
from where you left off.
1. Turn on your TV and the 6. jumps back 30
STB using the and seconds in the program you
buttons. are watching.
2. If you have just watched a 7. jumps forward 30
DVD, make sure your TV is seconds in the program you
set to the correct A/V Input are watching.
for your STB. 8. records the current
3. Press the <CH +>,or <CH -> program.
buttons to see the next 9. Buttons , , and
higher or lower channel. will only operate
4. You can go directly to any during normal TV watching
channel by entering the if you have DVR service.
channel number on the 10. "If the RED LED starts
numberpad and pressing blinking 5 times rapidly
<OK>. when you press the
5. Press to see a list of <CH +/->, <CH +/->, and
TV programs. <OK>, or if the buttons
6. Press to return to TV stop lighting up, you should
replace the remote control
watching. batteries"
7. Press the button to
launch the FiOS TV Main
Menu. From the Main Menu
you can access all the
features of your FiOS TV
service.
8. Press <▲> <▼> <►> <◄>
keys to navigate through the
FiOS TV Menus and Guides.
To select any item, press
<OK>.
9. Press to return to the
last channel.
10. Press <Info> to see
information about the
current program.
11. Press <Exit> to return to
the previous menu option
or to watch TV.
New and Special Buttons
1. "On Demand" displays
a list of movies and other
programs you can watch at
any time.