Vizio VW26L User Manual page 26

c. The TV Input screen will be
displayed; default choice is
Antenna. If you are using Cable,
press the
CABLE.
Press the
remote to go to the next screen.
d. The Channel Scan screen will be
displayed; default choice is Scan.
Press the OK button on the
remote control to commence the
search for available channels to
be stored into memory.
If you do not want to scan for
channels at this time, press the
button on the remote to highlight
Skip Scan and then press the OK
button.
e. The screen will now change to
show the progress of the search
for Analog (NTSC) and Digital
(ATSC) channels.
Note: DTV digital broadcast is not available in all
areas. Refer to www.antennaweb.org
information about availability in your area, type of
antenna and in which direction to point your
antenna. The channel availability through cable
depends upon which channels your cable operator
supplies in Clear QAM; consult your cable
operator for more information.
f. When finished, the Complete
screen will be displayed to
informed that the HDTV has
completed the Initial Setup.
Press the OK button on the
remote control to exit and begin
watching TV.
Version 2/6/2007
button to highlight
button on the
to get
26
www.VIZIO.com
VIZIO VW26L HDTV10F User Manual