Vizio VOJ320M User Manual page 27

Note: At this point, if a set-top box from your cable or satellite service company is being used, press the
LAST button on the remote control and skip to select input source in the next section. Otherwise continue
with next step:
a. The Tuner screen will be displayed. If
you are using Cable Service (with no
box), press the
control to choose CABLE.
Press the
go to the next screen.
b. The Channel Scan screen will be
displayed; default choice is Scan. Press
the button on the remote control to
commence the search for available
channels to be stored into memory.
If you do not want to scan for channels
at this time, press the
remote to highlight Skip Scan and then
press the
Note: If you select Skip Scan, you can
scan channels at a later time by
selecting the TV input, then going to the
Menu and selecting the Auto Search
option in the TV menu.
c. The screen will now change to show the
progress of the search for Analog
(NTSC) and Digital (ATSC) channels.
Note: DTV digital broadcast is not available in all
areas. Refer to www.antennaweb.org to get
information about availability in your area, type of
antenna and in which direction to point your
antenna. The channel availability through cable
depends upon which channels your cable operator
supplies in Clear QAM; consult your cable
operator for more information.
When finished, the Complete screen will be
displayed to inform you that the HDTV has completed the Initial Setup.
Press the button on the remote control to exit and begin watching TV.
Version 6/5/2009
▼
button on the remote
button on the remote to
▼
button on the
button.
www.VIZIO.com
27
VIZIO VOJ320M User Manual