Chapter 1 Setting Up Your Hdtv; Attaching The Tv Stand; Unpack The Tv And Stand Base; Attach The Tv Stand Base - Vizio VM190XVT User Manual

VIZIO VM190XVT/VM230XVT User Manual

Chapter 1 Setting Up Your HDTV

!
Read this user manual carefully before installing your HDTV.
!
The power consumption of your HDTV is about <40W (AVG). Use the included AC/DC power
adapter. When an extension cord is required, use one with the correct power rating. The cord
must be grounded and the grounding feature must not be compromised.
!
Install your HDTV on a flat surface to avoid tipping.
!
For proper ventilation, you must allow space between the back of your HDTV and the wall.
!
Avoid installing your HDTV in places with high humidity, dust, or smoke so you do not shorten the
service life of the electronic components.
!
Install your HDTV in a level, landscape orientation, with the VIZIO logo at the bottom to prevent
poor ventilation and excessive component damage.
!
If you want to mount your HDTV on the wall, see below for additional information.
!
Read this user manual carefully before installing your HDTV.
VIZIO offers professional installation services including home networking. Contact VIZIO for more
information on these services at 877-MYVIZIO (877-698-4946) or www.VIZIO.com.

Attaching the TV Stand

Unpack the TV and stand base:

1. Remove the remote control, batteries, base, and AC/DC power adapter.
2. Remove the TV from the box and lay it face down on a clean, flat surface.
Note: Make sure that the surface is free of debris to prevent the TV screen from getting scratched.

Attach the TV stand base:

1. Push the stand base onto the stand neck (already connected to TV) making sure the arrow on the
base points toward the front of the TV.
2. On the bottom of the base, tighten the thumb screw. Move the TV into an upright position.
8
www.VIZIO.com