Vizio LCD HDTV VU37L User Manual page 6

Preparing Your LCD HDTV for Wall Mounting Preparing Your LCD HDTV for Wall Mounting Preparing Your LCD HDTV for Wall Mounting Preparing Your LCD HDTV for Wall Mounting
To remove the stand base To remove the stand base To remove the stand base To remove the stand base
1. Unplug all of the cables and cords from
your VU37L HDTV10A.
2. Place the VU37L HDTV10A face down
on a soft and flat surface (blanket, foam,
cloth, etc) to prevent any damage to the
TV.
3. Push up the plastic panel on the back of
the stand and lift it away once to release.
4. Remove the eight (8) screws that were
hidden by the panel, while holding the
base.
5. Carefully remove the stand base.
Now, the VU37L HDTV10A can fit securely to a
mount (sold separately) by utilizing the mounting
holes in the center of the back panel of the TV.
Please make sure to read the
instructions of your specific mount to properly
hang the VU37L HDTV10A.
The pitch of the mounting holes is 400mm
horizontally and 200mm vertically.
The screw type required is metric M6, 1.00mm
pitch. The length of the screws will depend on
the thickness plate being attached to TV set, our
brackets come with different length screws.
To find the perfect mount for the VIZIO VU37L HDTV10A, browse VIZIO's certified mount selection at
www.VIZIO.com or call directly 888-VIZIOCE (888-849-4623).
Version 3/12/2008 6
www.VIZIO.com
VIZIO VU37L HDTV10A User Manual