Hide thumbs Also See for BD-88DEM:

Advertisement

Upright Freezer
Mod l e : BD-88DEM

Advertisement

Table of Contents
loading

Summary of Contents for Haier BD-88DEM

  • Page 1 Upright Freezer Mod l e : BD-88DEM...
  • Page 2: Table Of Contents

    Safety instructions and warnings.................3 Disposal notes ......................5 Setting up........................6 Description........................8 Functions ........................9 Defrosting, Cleaning ....................12 Shutting you appliance down..................13 Trouble Shooting ......................13 Change over door hinges.....................15 Qingdao Haier Special Freezer Co.,Ltd. Haier Industrial Park, Economic and Technological Development Zone, Qingdao, Shandong, China...
  • Page 4: Safety Instructions And Warnings

    Safety instructions and warnings This symbol shows that this appliance uses a flammable refrigerant. If the refrigerant is leaked and exposed to an external ignition source, there is a risk of fire. WARNING: WARNING: WARNING: WARNING: WARNING: The appliances are intended to be placed against a wall with a free distance not exceeding 75 mm. WARNING: WARNING: order to avoid a hazard.
  • Page 5 This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
  • Page 6: Disposal Notes

    Disposal notes The packaging is made of recyclable materials. -Corrugated board/board -EPS moulded part -Polythene sheets -Polypropylene straps Keep packaging material away from children-polythene sheets an bags can cause suffocation. Please return the packaging to an official collection point. Nameplate The nameplate is located inside the freezer compartment glued low down on the left side.
  • Page 7: Setting Up

    Setting up Remove all package parts, the foam base and the adhesive tape fixing  accessories. Place the freezer in a proper location.  Clean the inside and outside of the freezer before use.  After the appliance has been levelled and cleaned, let it remain idle for at ...
  • Page 8 only. The socket must be fused with a 10A fuse or higher, it must be away from  the rear of the appliance and must be easily accessible. Do not connect the appliance to the supply with other equipment using a ...
  • Page 9: Description

    Description This diagram may be slightly different from the layout of the freezer you have just purchased. FIG.1 ① Operating controls ② Convenient box ③ Drawers ④ Adjustable height feet...
  • Page 10: Functions

    Functions Control panel elements ① Function selection button ② Temperature setting button ③ Unlocked button Breast milk storage model icon ④ ⑤ Fast-freezing model icon ⑥ Freezing temperature display icon ⑦ Alarm indicator icon ⑧ Button-locked icon Start up the appliance Insert the plug in the socket to switch on the freezer.
  • Page 11 Function-selecting When the screen is locked, press ”Func.Set” button, the icon will be light up, and press the ”Func.Set” button again,the icon will be light up, and then press the button the icon will be off, according to this cycle. again, Breast milk storage mode: On: When the button...
  • Page 12 - It sounds when it is not cold enough in the freezer compartment. This icon will also flash. - When too much warm air from the outside enters when inserting, re-arranging or removing frozen food. The alarm signal will not appear within 2 hours after the power is turned on. The audible warning signal is switched off by pressing any button.
  • Page 13: Defrosting, Cleaning

    Defrosting Pull out the mains power plug before defrosting. Remove the frozen food and store in a cool place.  Remove the drawers and glass shelves.  Wipe with a dry cloth when the defrosting water flows into the groove at the ...
  • Page 14: Shutting You Appliance Down

    When cleaning the display screen and other electrical appliances, do use dry cloth. Moving the appliance -Detach the power plug and turn off the power. -Remove all food in the appliance. -Secure the drawers and other movable parts in the appliance with adhesive tape.
  • Page 15 Appliance not working: the control lamps are not lit when you touch the  button -Is the plug correctly fitted in the mains socket? -Is the socket fuse intact? The temperature is not low enough  - Check if the temperature setting correct (see “Setting the temperature”). - Ensure the door is closed tightly.
  • Page 16: Change Over Door Hinges

    Changing over door hinges You can change over the door hinges if necessary. Before operating always switch off the appliance. Pull out the mains plug or remove/unscrew the fuse. (Please see attached FIG.2) FIG.2...

Table of Contents