root# snmp-server user mapale auth sha 000111 priv des56 000111
root# show snmp user mapale
Name
------------------------------- -------------- ------- ----------- ------------
mapale
cli:192.168.208.3:root#
Cuda 12000 IP Access Switch CLI-based Administration Guide
Tasks
4. Specify how user attributes are
stored.
By default, storage type is set to
NonVolatile.
5. Specify the user's status.
By default, the Cuda sets status
type to Active.
6. Display SNMP user attributes.
7. Remove an SNMP user.
Example
The following example configures an SNMP user with authentication type
and privacy attributes:
Authentication Privacy Storage
HMAC-SHA-96
Configuring SNMP Access Control
Commands
snmp-server user <user> [storage
{volatile | nonvolatile | permanent |
readonly}]
snmp-server user <user> [status
{enable | disable}]
show snmp user [<user>]
no snmp-server user <user>
CBC-DES NonVolatile Active
177
Status