Section 2 Getting Started - HP t450 User Manual

Loading the Battery
Before using the camera, you must insert the supplied Lithium-ion rechargeable battery.
1. Slide the latch and open the battery cover.
2. Insert the battery observing to the correct polarity ( + and -) as
shown to the right.
3. Close the battery cover.
Note
• Different battery types and ambient operating
temperatures will affect the battery performance.
• Never expose the battery to extreme heat. Do not dispose
of a battery by burning or by throwing it into a fire. Heat
can cause the battery to explode and/or release caustic
liquid, which both may possibly cause serious injuries.
• Turn the power off and stop using the battery if you detect
that the battery is excessively hot.
Charge the battery
Charge the battery fully before first use, using the AC charger or the provided USB cable. The LED on the back
of the camera will blink as an indication of active charging. The LED will turn to a solid light, indicating that
charging is complete. A full charge requires 4- 5 hours. The LED indicator light will turn off completely after 3
to 5 minutes. Actual charging time will vary depending upon battery condition and ambient temperature.
Note
• Never charge the battery in a way other than instructed. Otherwise, a fire or battery explosion may
occur resulting in damage or serious injury.
• Use the AC adapter provided only with the proper power
supply voltage as indicated on the adapter.
• Using any other power supply voltage might cause damage
to the camera or possibly electric shock.
• When you need to disconnect power from the camera, be
sure to unplug the power adapter from the electrical outlet.
• If a wireless connection is active, the camera will keep
running until the power runs out.
Getting Started
7
Section 2
Adapter charging mode
PC USB charging mode
EN