Download Print this page
Pet Gear AT3 Instruction Manual

Pet Gear AT3 Instruction Manual

For the on_the-go pet no-zip pet stroller
Hide thumbs Also See for AT3:

Advertisement

Quick Links

INSTRUCTION MANUAL
AT3 NO-ZIP PET STROLLER
PG8350NZ
Interior Dimensions:
29
"L x 13"W x 22"H
To see our full line of products, visit us online at: www.petgearinc.com
CUSTOMER SERVICE HELP DESK
customerservice@petgearinc.com

Advertisement

loading

Summary of Contents for Pet Gear AT3

  • Page 1 INSTRUCTION MANUAL AT3 NO-ZIP PET STROLLER PG8350NZ Interior Dimensions: "L x 13"W x 22"H To see our full line of products, visit us online at: www.petgearinc.com CUSTOMER SERVICE HELP DESK customerservice@petgearinc.com...
  • Page 2: Parts List

    Step 1. Push back wheels on to axle, as shown Step 2. Pull on wheel to make sure the wheel is in Figure A, until they lock into place. should look like Figure B. Shown with both back wheels in place. AT3 NO-ZIP PET STROLLER • PG8350NZ...
  • Page 3 Step 5. To use stroller in locked position for jogging, Step 6. To use stroller in swivel position, pull pin move pin so that it is at the top of the “L” shaped down, and to the right. cutout. AT3 NO-ZIP PET STROLLER • PG8350NZ...
  • Page 4 Step 1. Release folding latch (D). Step 2. Spread handle (E) and seat apart until the frame clicks and locks on both sides. Step 3. Ensure that the stroller is locked in on both D. sides before using. AT3 NO-ZIP PET STROLLER • PG8350NZ...
  • Page 5 TO SECURE COMPARTMENT TO FRAME Step 1. Open stroller and pull compartment down. Step 2. Clip onto frame. AT3 NO-ZIP PET STROLLER • PG8350NZ...
  • Page 6 tube and fasten to the bottom of the compartment.
  • Page 7 Step 2. Align the other side of the tray with the Step 3. Push down on the tray to lock it into place. single rivet on that side. AT3 NO-ZIP PET STROLLER • PG8350NZ...
  • Page 8 AT3 NO-ZIP PET STROLLER • PG8350NZ Step 1. To close compartment, pull downward and clip the canopy into the front of the stroller until it locks. Step 2. To open the stroller canopy, simply push and release button to unlock.
  • Page 9 SLIDE TO RIGHT Squeeze front lock release (G.) and rotate 180 degrees forward AT3 NO-ZIP PET STROLLER • PG8350NZ...
  • Page 10: Wheel Maintenance

    • Regularly check stroller for loose parts. These should be tightened or replaced. WHEEL MAINTENANCE • To clean and lubricate front and rear wheels, push out locking lever under wheel housing to release rear wheel. AT3 NO-ZIP PET STROLLER • PG8350NZ...
  • Page 11 FOR PETS ONLY. Not intended to be used as a restraining device for aggressive or dangerous animals that dig, chew or paw aggressively. Do not leave your pet unattended. PET GEAR is not liable for any damage caused by aggressive, warnings and the instructions could result in serious injury or death.
  • Page 12: Replacement Parts

    REPLACEMENT PARTS Use only PET GEAR replacement parts. Please have your model number ready before calling. You can also request parts: http://www.petgearinc.com/main.asp?sel=2 192 Sheldon Avenue • West Rutland, VT 05777 • 877-752-9123 • www.petgearinc.com AT3 NO-ZIP PET STROLLER • PG8350NZ...

This manual is also suitable for:

Pg8350nz