Specifications - Bogen & V250 Installation And Use Manual

Power Output (RMS):
Frequency Response
Transformer:
Direct:
Distortion
Transformer:
Direct:
Direct:
Signal-to-Noise
Fundamental:
With Aux Module:
With Mic Module:
With Tel Module:
Tone Controls
Bass Frequency:
Treble Frequency:
Low Cut Frequency:
Sensitivity
Output Regulation:
Output Impedance
Transformer-Coupled:
Direct Coupled:
Inserts
Insert "OUT" Level:
Insert "OUT" Impedance:
Insert "IN" Sensitivity:
Insert "IN" Impedance:
Buffered Output
Output Level:
Output Impedance:
AC Power Receptacle:
AC Line Draw:
Dimensions:
Product Weight:
* Referenced to FRP output level, 20-20 kHz bandwidth limited.
All specifications subject to change without notice.
V35: 35W (45W Typical, @ 1 kHz/0.1%/4Ω)
V60: 60W (85W Typical, @ 1 kHz/0.1%/4Ω)
V100: 100W (140W Typical, @ 1 kHz/0.1%/4Ω)
V150: 150W (200W Typical, @ 1 kHz/0.1%/4Ω)
V250: 250W (340W Typical, @ 1 kHz/0.1%/4Ω)
45-20 kHz; 0/-2 dB @ FRP
20-20 kHz; 0/-1 dB @ FRP
0.5% THD+N, Maximum, Full-rated bandwidth @ FRP
0.1% THD+N, Maximum, Full-rated bandwidth @ FRP
0.05% THD+N, FRP @ 1 kHz
-94 dB*
-70 dB*
-60 dB*
-70 dB*
100 Hz (+/- 10 dB minimum)
10 kHz (+/- 10 dB minimum)
125 Hz @ -6 dB/octave
0.4V (at backplane connector)
2 dB or better no load to full load
70V, 25V, 8 ohms; balanced or unbalanced
4 ohms
1VRMS (@FRP)
50 ohms maximum
1VRMS
10k ohms minimum
4VRMS (Max Amp Gain @ rated input sensitivity
50 ohms maximum
500 watts maximum power, unswitched
V35: 0.6A;V60: 1.3A;V100: 2A;V150: 3.5A;V250: 5.5A
16 / " W x 3 / " H x 12" D (all models)
1 1
2 2
V35: 24 lb.
V60: 28 lb.
V100: 32 lb.
V150: 35 lb.
V250: 40 lb.
12

Specifications