Power On/Off; Turning The Unit On; Selecting A Source; Turning The Unit Off - Pioneer KEH-P2030 Operation Manual

Power ON/OFF

Turning the unit on

% Press SOURCE to turn the unit on.
When you select a source the unit is turned
on.

Selecting a source

You can select a source you want to listen to.
To switch to the cassette player, load a cas-
sette tape in this unit (refer to page 12).
% Press SOURCE to select a source.
Press SOURCE repeatedly to switch between
the following sources:
TunerCassette playerMulti-CD player
External unit
Notes
! In the following cases, the sound source will
not change:
 When a unit corresponding to each source
is not connected to this unit.
 When no cassette is set in this unit.
 When no magazine is set in the multi-CD
player.
! External unit refers to a Pioneer product (such
as one available in the future) that, although
incompatible as a source, enables control of
basic functions by this unit. Only one external
unit can be controlled by this unit.
! When this units blue/white lead is connected
to the cars auto-antenna relay control term-
inal, the cars antenna extends when this
units source is turned on. To retract the an-
tenna, turn the source off.

Turning the unit off

% Press SOURCE and hold until the unit
turns off.
HHHHHHHHHHHHHH
Section
03
9
En