Dual Watch Function; Keypad Beep - Midland G7 User Manual

3. Confirm by pressing the PTT key or wait for 10 seconds.
Now, each time your Midland G7/G7E Pro sends out a tone call, it will beep
with the selected melody.
If the Vibracall function is activated (See par. "Vibra-call function"), the call
tone won't be heard.

Dual Watch function

This function allows the monitoring of 2 channels of your choice.
Procedure:
1. Select one of the 2 channels you want to monitor.
2. Press 9 times the MENU button in the PMR band until the display shows
"TX oF RX".
3. With the / button select the second channel to monitor.
4. Push the PTT key or wait for 10 seconds for confirmation.
To disable the function, press the MON/SCAN button.

Keypad beep

To deactivate the keypad beep, follow these steps:
Press for 8 times the MENU button in the PMR band, until "bP on" is
1.
displayed.
2. Use the / buttons until the display shows "bP of".
Confirm by pushing the PTT or wait for 10 seconds.
3.
Now you won't hear any beep at the pressure of any button.
Midland G7 Pro user's manual | 21